Abstract:A microchip flow cell was developed for flow injection renewable surface assay by reflectance spectrophotometry. The flow cell was coupled to a sequential injection system and optical fiber photometric detection system. The flow cell featured a three-layer structure. The flow channel was cut into a silicone rubber membrance which formed the middle layer, and a porous filter was inlayed across a widened section of the channel to trap microbeads introduced into the flow cell. The area of the detection window of the flow cell was approximately 3.6 mm2, the volume of the bead trapped in the flow cell was 2.2 microL, the depth of the bead layer was 600 microns. A multistrand bifurcated optical fiber was coupled with incident light, detector and flow cell. The chromogenic reaction of Cr(VI) with 1,5-diphenylcarbohydrazide (DPC) which was adsorbed on trapped Polysorb C-18 beads was used as a model reaction to optimize the flow cell design and the experimental system. The reflectance of the renewable reaction surface was monitored at 540 nm. With 100 microL sample loaded and 1.0 mL.min-1 carrier flow rate, the linear response range was 0-0.6 microgram.mL-1 Cr(VI). A detection limit (3 sigma) of 6 ng.mL-1, precision of 1.5% RSD(n = 11), and a throughput of 64 samples per hour were achieved. Considerations in system and flow cell design, the influence of depth of the bead layer, weight of beads used, and the flow rates of carrier stream on the performance were discussed.

Development Of Renewable Surface Techniques In Flow Injection Analysis

Developments in Flow Injection—Capillary Electrophoresis Systems

Direct Processing and Analysis of Solid and Other Complex Samples with Automatic Flow Injection Systems

New Applications of Flow Injection Micro-column On-line Preconcentration Coupled with Atomic Spectrometry

Flow-Injection Methods in Water Analysis—Recent Developments

Trends of Flow Injection Sample Pretreatment Approaching the New Millennium

New Developments in Flow Injection Separation and Preconcentration Techniques for Electrothermal Atomic Absorption Spectrometry

[Studies on a Sequential Injection Renewable Surface Reflectance Spectrophotometric System Using a Microchip Flow Cell].

The Development of Flow Injection Analysis System and Its Application to Process Monitoring

The Third Generation of Flow Injection Analysis:Current Situation and Perspectives of Lab-on-Valve Scheme

Surface Plasmon Resonance Sensing Technology and Bioanalytical Instrument

FLow-injection analysis: a new approach to quantitative measurements in clinical chemistry.

A Gravity-Induced Flow Injection System for Surface Plasmon Resonance Biosensor.

Automated membrane-based sampling and sample preparation exploiting flow-injection analysis

A flow injection knotted reactor suction elution method coupled with flame atomic absorption spectrometry for the determination of trace lead and zinc in water

New Developments in Flow Injection Vapor Generation Atomic Absorption Spectrometry

Trends And Potentials In Flow Injection On-Line Separation And Preconcentration Techniques For Electrothermal Atomic Absorption Spectrometry

REVIEW: ADVANCES AND APPLICATIONS OF SURFACE PLASMON RESONANCE BIOSENSING INSTRUMENTATION

Development of transient data acquisition system for hyphenated techniques coupled with inductively coupled plasma atomic emission spectrometry

Applications Of Flow Injection Knotted Reactor On-Line Separation And Preconcentration Coupled With Atomic Spectrometry