Abstract:Cu/ZnO catalysts with varied Cu/(Cu + Zn) molar ratios were prepared by a facile solid-state method. The Cu/(Cu + Zn) molar ratio displayed a significant effect on the oxygen vacancy formation of the calcined catalysts, thereby influencing the CuO–ZnO interaction and the reducibility of CuO. The Cu/(Cu + Zn) molar ratio also exhibited a significant effect on Cu0 surface area, oxygen vacancy, the ratio of ZnO(002) plane to ZnO(100) plane, as well as the basicity and acidity of the reduced catalysts, thereby affecting the catalytic performance for low-temperature methanol synthesis from syngas containing CO2. The correlations of methanol space time yield (STY) versus the physicochemical characteristics of Cu/ZnO catalysts were studied. The catalyst with equal amounts of Cu and Zn displayed the best catalytic activity owing to higher Cu0 surface area, more oxygen vacancy and ZnO(002) plane, as well as more moderately basic sites.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18600?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18600</a>.Reaction equipment; Cu 2p and Zn 2p XPS spectra of the calcined catalysts; correlation between the maximum reduction temperature and Ovacancy/Olattice ratio; Cu 2p and Zn 2p XPS spectra of the reduced catalysts; Cu LMM Auger spectrum of CZ-R-0.5 catalyst; reaction route of high-temperature ICI process for methanol synthesis; new reaction route of methanol synthesis at low temperatures using methanol itself as a catalytic promoter; variation of total carbon conversion of CZ-R-0.5 catalyst with time on stream; XRD patterns of the CZ-R-0.5 sample before and after reaction; and results of comparison with CO2 and without CO2 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18600/suppl_file/am0c18600_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Investigation On The Catalysts And Reaction Process For The Methanol Synthesis At Lower-Temperature In Liquid Phase

Efficient Conversion of Methane to Aromatics in the Presence of Methanol at Low Temperature

Enhancing Low-Temperature Methane Conversion on Zn/ZSM-5 in the Presence of Methanol by Regulating the Methanol-to-aromatics Reaction Pathway

Development and application of energy-saving process for methanol to olefins

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

Methanol to propylene process using moving bed technology and its engineering study

Techno-Economic Analysis of Methanol to Propylene Process

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Heterogeneous catalysts, reaction kinetics, and reactor designs for methanol production from carbon dioxide: A critical review

Recent Progress in Methanol‐to‐Olefins (MTO) Catalysts

Development of Catalysts for Synthesizing Methanol from Syngas

Structure–Performance Correlations over Cu/ZnO Interface for Low-Temperature Methanol Synthesis from Syngas Containing CO 2

Study on the Methanol Synthesis in Slurry Reactors

An Active and Stable Methanol Synthesis Catalyst for the Three-Phase Process

Enhanced performance and stability of Cu/ZnO catalyst by introducing MgO for low-temperature methanol synthesis using methanol itself as catalytic promoter

From catalyst development to reactor Design: A comprehensive review of methanol synthesis techniques

Liquid-phase CO 2 hydrogenation to methanol synthesis: Solvent screening, process design and techno-economic evaluation

High Throughput Research and Development of Catalysts for Converting Methanol into Propylene

Preparing methods of CuO/ZnO/Al2O3 catalysts for the synthesis of methanol

Enhanced photothermal dehydration of methanol over W18O49/Au/SAPO-34 catalysts with broadened light absorption

Methanol Production in Fluidized Bed Reactor Using Different Catalysts