Abstract:A numerical model is established to investigate the effects of the influencing factors such as design parameters and operating conditions on the performance and behavior of the engagement process of the wet clutch based on the Navier–Stokes equations, contact mechanics, and heat transfer theory. A finite element contact model called KE contact model is used to analyze the rough contact during engagement process and thermal effect on the viscosity is considered based on heat transfer theory. The integration of the grooving into the simulation and the method of coupled finite element by domain decomposition of groove and ungrooved areas are put forward to facilitate the analysis. The experimental results agree well with the numerical model which takes the normal pressure, the temperature of ATF, relative revolution speed, the permeability and the groove geometry into account. The results of numerical simulation and the experiment indicate that the applied pressure not only affects the engagement time, but also has influence on the value of the engagement torque. Besides, the engagement time is roughly proportional to the relative revolution speed. The influencing factors such as the temperature of ATF, the permeability, grooves, the torque judders and effects of PID control parameters are also discussed in the paper. The performance and behavior of the engagement of the wet clutch were studied by two methods of numerical calculation and experimental research, which make the working process of the wet clutch more detailed.

Transient Characteristics of the Yield Surface of Electrorheological Clutch

A NUMERICAL SIMULATION OF TRANSIENT YIELD SURFACES OF ELECTRORHEOLOGICAL FLOWS IN CONCENTRIC CLUTCH

Transient Yield Characteristics Of Er Fluids Between Rotary Concentric Cylinders

Simulation and Experiment on Dynamic Engagement Characteristics of Wet Clutch

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Simulation Research on the Drag Torque of Disengaged Wet Clutches

Characteristics Of Electrorheological Fluid Flow Between Two Concentric Cylinders

The Transient Behavior of Electrorheological Fluid in Tensile Flow

Transient temperature characteristics of friction clutch disc considering thermal contact conductance under sliding conditions

STUDY ON CHARACTERISTICS OF AN ELECTRORHEOLOGICAL FLUID COUPLING

An Analysis on the Thermoelastic Instability of Wet Multi-disc Clutch

Investigation Of Characteristics Of Electro-Rheological Fluid Couplings

Investigation of thermal behavior of a novel multi-conical friction pair during wet clutch's engagement based on finite difference method

Boundary Effect in Electrorheological Fluids.

A Dynamic Analytical Model on Electrical Circuit Response of Magnetorheological Clutch

Characteristics of Electrorheological Fluid Flow in Journal Bearings

Impact Analysis of the Cushion Spring on the Dry Clutch Torque Transmissibility

Simulation Analysis of Steady State Characteristics For A New Type Electromagnetic Clutch

Transient Response of Sheared Magnetic Powder Excited by A Stepwise Magnetic Field and Its Comparison with Er and Mr Fluids

Ultrahigh Yield Stress in a General Electrorheological Fluid under Compression