Abstract:Considering that the fixed crack model by default of the general finite element software was unable to simulate the shear softening behavior of concrete in the actual situation, a rotational crack model based on the modified compression field theory developed by UMAT (user material) of ABAQUS software was proposed and applied to the nonlinear analysis, and a numerical simulated model for the steel-concrete composite slab was built for shear analysis. Experimental studies and numerical analyses were used to investigate the shear load-carrying capacity, deformation, and crack development in steel plate-concrete composite slab, as well as the effects of the shear span ratio and shear stud spacing on the shear performance and the contribution of the steel plate and the concrete to the shear performance. Shear capacity tests were conducted on three open sandwich steel plate-concrete composite slabs and one plain concrete slab without a steel plate. The results indicated that the shear-compression failure mode occurred primarily in the steel plate-concrete composite slab and that the steel plate sustained more than 50% of the total shear force. Because of the combination effect of steel plate, the actual shear force sustained by the concrete in the composite slab was 1.27 to 2.22 times greater than that of the calculated value through the Chinese Design Code for Concrete Structures (GB 50010-2010). Furthermore, the shear capacity of the specimen increases by 37% as the shear stud spacing decreases from 250 mm to 150 mm. By comparing the shear capacity, the overall process of load deformation development, and the failure mode, it was shown that the simulation results corresponded with the experimental results. Furthermore, the numerical simulation model was applied to analyze the influence of some factors on composite slab, and a formula of shear bearing capacity of slab was obtained. The results of the formula agreed with the test result, which could provide references to the design and application of steel plate-concrete composite slab.

Bending, Buckling and Vibration of Reinforced Concrete Slabs Bonded with Thin Steel Plate

Bending and vibration characteristics of a strengthened plate under various boundary conditions

STIFFENER STIFFNESS AND ELASTIC BUCKLING STRESS OF STEEL PLATE SHEAR WALL

Elastic stability of plate simply supported on four sides subjected to combined bending shear and patch loading

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

ELASTIC BUCKLING OF SIMPLY SUPPORTED RECTANGULAR PLATES UNDER BENDING,SHEAR AND BEARING STRESSES

Effective Rigidity of One-Side Stiffeners in Steel Shear Walls

Elastic buckling of steel shear walls vertically stiffened by channels under axial compression

ELASTIC BENDING AND STABILITY OF STEEL-CONCRETE COMPOSITE PLATE

Experimental study on flexural capacity of steel plate-concrete composite slabs

Experimental Study of Steel Plate Composite Shear Wall Units under Cyclic Load

ELASTIC LOCAL SHEAR BUCKLING ANALYSIS ON SIMPLY SUPPORTED STEEL-CONCRETE COMPOSITE SLAB

Bending and vibration characteristics of damaged RC slabs strengthened with externally bonded CFRP sheets

Experimental studies of the bearing capability of a type of steel-concrete composite slab

Nonlinear bending of simply supported rectangular Reissner–Mindlin plates under transverse and in-plane loads and resting on elastic foundations

NONLINEAR FINITE ELEMENT ANALYSIS OF STEEL PLATE-CONCRETE COMPOSITE BEAMS

Non-Linear Finite Element Analysis Model For Steel-Plate Strengthened Rc Beams Considering The Debonding Of Plate-Concrete Interface

Behavior of sinusoidal-corrugated-steel-plate–concrete composite slabs: Experimental investigation and theoretical model development

Experimental study on mechanical behavior and vibration characteristic of re-entrant trough profiled steel sheeting-light weight concrete composite slAbs

Slip Distribution Analysis of Steel Plate-Concrete Composite Flexural Members

Shear Capacity of Open Sandwich Steel Plate-Concrete Composite Slab: Experimental and Analytical Studies