Abstract:Iron(II,III) oxide (Fe3O4) nanoparticles have shown great promise in many magnetic-related applications such as magnetic resonance imaging, hyperthermia treatment, and targeted drug delivery. Nevertheless, these nanoparticles are vulnerable to oxidation and magnetization loss under ambient conditions, and passivation is usually required for practical applications. In this work, a home-built rotating fluidized bed (RFB) atomic layer deposition (ALD) reactor was employed to form dense and uniform nanoscale Al2O3 passivation layers on Fe3O4 nanoparticles. The RFB reactor facilitated the precursor diffusion in the particle bed and intensified the dynamic dismantling of soft agglomerates, exposing every surface reactive site to precursor gases. With the aid of in situ mass spectroscopy, it was found that a thicker fluidization bed formed by larger amount of particles increased the residence time of precursors. The prolonged residence time allowed more thorough interactions between the particle surfaces and the precursor gas, resulting in an improvement of the precursor utilization from 78% to nearly 100%, even under a high precursor feeding rate. Uniform passivation layers around the magnetic cores were demonstrated by both transmission electron microscopy and the statistical analysis of Al mass concentrations. Individual particles were coated instead of the soft agglomerates, as was validated by the specific surface area analysis and particle size distribution. The results of thermogravimetric analysis suggested that 5 nm-thick ultrathin Al2O3 coatings could effectively protect the Fe3O4 nanoparticles from oxidation. The x-ray diffraction patterns also showed that the magnetic core crystallinity of such passivated nanoparticles could be well preserved under accelerated oxidation conditions. The precise thickness control via ALD maintained the saturation magnetization at 66.7 emu/g with a 5 nm-thick Al2O3 passivation layer. This good preservation of the magnetic properties with superior oxidation resistance will be beneficial for practical magnetic-based applications.

Process of coating on ultrafine particles by surface hydrolysis reaction in a fluidized bed reactor

The Process Study of SiO2 Coating on α-FeOOH Particles by Surface Hydrolysis Reaction in Fluidized BED Reactor

Formation of AlOOH and Silica Composite Hierarchical Nanostructures Thin Film by Sol–gel Dip-Coating for Superhydrophobic Surface with High Adhesion Force

The Coating Process of Nano-scale Hydrous Silica Film on TiO2 Particles by Chemical Deposition in Aqueous Solution

Preparation and Research of Hydrophobic PDMS/Nano-SiO2 Modified SiO2 Coating

Film-Coating Process of Hydrated Alumina on TiO<sub>2</sub>Particles

Preparation and Characterization of Super-Hydrophobic Silica Coating by HVOF

Study on the Interface of SiO2/alpha-FeOOH and SiO2/alpha-Fe2O3 Fine Particles

Preparation of Magnetic Fe3O4/SiO2 Nano-composite Particles by Chemical Deposition in Aqueous Solution

Effects of −OH Groups on Fe3O4 Particles on the Heterogeneous Coating in a Hydrous Alumina Coating Process

FINE PARTICLE COATING FOR RELEASE CONTROL BYUSING RESS PROCESS IN FLUIDIZED BED

Formation Process of the Integrated Core(Fe-6.5wt.%Si)@Shell(SiO2) Structure Obtained via Fluidized Bed Chemical Vapor Deposition

Preparation and Surface Modification of Monodisperse Fe3O4 Nanoparticles

Synthesis, Surface Modification and Characterization of Magnetic Fe3O4@SiO2 Core-Shell Nanoparticles

Surface Passivation of Fe3o4 Nanoparticles with Al2o3 Via Atomic Layer Deposition in A Rotating Fluidized Bed Reactor

Fine particle coating for release control by using RESS process in fluidized bed

Preparation and Characterization of Silica-coated Fe_3O_4 Nanoparticles

A new route to apply nanometric alumina coating on powders by fluidized bed chemical vapor deposition

Si-HfO2 composite powders fabricated by freeze drying for bond layer of environmental barrier coatings

Rheological behavior of ultrafine α-FeOOH particle synthesis process

Fabricating Superhydrophobic and Oleophobic Surface with Silica Nanoparticles Modified by Silanes and Environment-Friendly Fluorinated Chemicals