Evaluation of Octyltetramethyldisiloxane‐Containing Ethylene Copolymers As Composite Lubricant for High‐Density Polyethylene
Zhen Jin,Hong Fan,Bo-Geng Li,Shiping Zhu
DOI: https://doi.org/10.1002/mame.201600292
2016-01-01
Macromolecular Materials and Engineering
Abstract:A series of octyltetramethyldisiloxane‐containing ethylene copolymers, poly(ethylene‐co‐OO7) (abbreviated as E‐co‐OO7), are prepared from vanadium catalyzed copolymerization of ethylene with 1‐oct(7‐en)yl‐3‐octyl‐1,1,3,3‐tetramethyldisiloxane (or OO7) macromonomer. The copolymers containing different silicone contents are employed as composite lubricants for high‐density polyethylene (HDPE). The influences of the silicone content in the copolymer and that of the added copolymer amount in the blend on the bulk and surface properties of the blends are systematically investigated. The results show that E‐co‐OO7 exhibits superior overall performance in comparison with conventional lubricants silicone masterbatch and polyethylene wax. Compared to HDPE control, 10 wt% E‐co‐OO7 addition increases the melt flow rates by 49%, increases the elongation at break from 740 to 860%, increases the water‐contact angle from 90° up to 108°, lowers the coefficient of friction from 0.072 to 0.049, lowers the specific wear rate from 11 × 10−3 to 5.6 × 10−3 mm3 Nm−1. The impact strength and high temperature thermal stability are also slightly improved. The measured Si/C atomic ratios demonstrate the sufficient silicone enrichment on surface of the blends. E‐co‐OO7 with 23.5 SiOSi per 1000 C gives the best internal lubrication, and E‐co‐OO7 with 29.7 SiOSi per 1000 C gives the best external lubrication.image