Abstract:The hot deformation behaviors of single- and two-phase CuAlMn shape memory alloy were studied. Isothermal compression tests were conducted at different temperatures from 400<math>°C</math> to 800<math>°C</math> and various strain rates from 0.001/S to 1/S. At the temperature below 500<math>°C</math>, CuAlMn alloy had a two-phase microstructure (FCC <math>α</math> phase + <math>L21</math> <math>β</math> phase); while at the temperature higher than 550<math>°C</math>, the alloy had a single <math>β</math> phase structure. The flow stress curves showed the stress drop for all samples, indicating a dynamic recrystallization (DRX) feature of the alloy. The local minimum value of stress drop appeared at 500<math>°C</math>. The thermal active energy (<math>Q</math>) were calculated to be <math>418.7 kJ mol−1</math> for <math>α+β</math> alloy at 400–500<math>°C</math> and <math>219.7 kJ mol−1</math> for <math>β</math> alloy at 550–800<math>°C</math>, respectively. The artificial neural network (ANN) model showed a high precision to predict the flow stress of the studied alloy at a wide range of temperature. Based on the dynamic material model (DMM) theory, the processing map of the alloy that consists of the contour lines of the power dissipation factor, <math>η</math>, and the instability criteria was established. The grains were refined to a micron level and DRX of <math>α</math> phase occurred during the deformation between 400–500<math>°C</math> at the low strain rate. The hot deformation behaviors of the alloy at the low temperature (400–450<math>°C</math>) mainly depended on the deformation of <math>α</math> phase. The optimum deformation parameters for the single-phase CuAlMn alloys were 750–800<math>°C</math>/0.1–1 s−1.

Effect of heat treatment on shape memory properties of ductile CuAlMn alloys

Effect of Heat Treatment Process on Properties of ITER-grade CuCrZr Alloy

The Effect of Annealing Temperature and Quenching Media Variations On Heat Treatment Process of Cu-Zn-Al Shape Memory Alloys For Shape Memory Effect and Microstructure

Effect of heat treatment on microstructure and mechanical properties of Cu–6.9Ni–2.97Al–0.99Fe–1.06Mn alloy

Effect of Al content on thermal stability, shape memory effect and mechanical properties of Cu–Al–Fe shape memory alloys

Effect of heat-treatment on the microstructure and Ms of Ni47Ti44Nb9 shape memory alloy

Effects of heat treatment on tensile properties and shape memory effects of ni-ti-nb alloy?

Hot deformation behavior of a CuAlMn shape memory alloy

Effects of heat-treatment temperature on microstructure and electrochemical properties of AB5 type MlNi 3.60Co 0.85Mn 0.40Al 0.15 hydride electrode alloy

Influence of Heat Treatment on the Microstructure and Hydrogen Storage Properties of Ti10V77Cr6Fe6Zr Alloy

Effect of Cooling Rate on Microstructure, Shape Memory Effect and Mechanical Properties of Cu–13Al–5Fe High-Temperature Shape Memory Alloy Fabricated by Laser Powder Bed Fusion

Transformation Behavior and Shape Memory Effect of Ti 50− X Ni 48 Fe 2 Nb X Alloys by Aging Treatment

Influence of Heat Treatment on Microstructures and Shape Memory Effect of Cu-28Zn-2.5Al wt. % Produced by Gravity Casting

Effects of cooling rate on martensitic transformation behavior and shape memory property for Ni-rich NiTiHf-Nb high-temperature shape memory alloy

Mechanical and Thermal Behavior of Cu84−xAl13Ni3Hfx Shape Memory Alloys

Effects of Heat Treatment on the Transformation Temperature and the Microstructure of Ni-Ti-Nb Shape Memory Alloy

Effect of Solution Treatment on the Shape Memory Functions of (TiZrHf)50Ni25Co10Cu15 High Entropy Shape Memory Alloy

Effects of Quenching Temperatures on Microstructure, Phase Transformation Characteristics and Shape Memory Behaviors of CuAlTa and CuAlTaNb HTSMAs

Effect of Heating/Cooling Rate on the Transformation Temperatures in Tinicu Shape Memory Alloys

Effect of Homogenization on the Transformation Temperatures and Mechanical Properties of Cu15Ni35Hf12.5Ti25Zr12.5 and Cu15Ni35Hf15Ti20Zr15 High-Entropy Shape Memory Alloys

Effect of heat treatment on the microstructure and mechanical properties of Al‐9Si‐0.4Mg‐0.1Cu alloy