Abstract:Porous metallic structures play a critical role in mass and heat transfer processes due to their high surface areas, fixed porosity, and high stiffness – so understanding their fluid flow behaviour is crucial in designing materials that perform efficiently in mass and heat transfer. In view of this, a multi-disciplinary approach is employed to study the hydrodynamics of aluminium foams produced by a liquid melt infiltration technique using experimental, computational fluid dynamics (CFD) modelling and simulation, as well as artificial neural network (ANN) machine learning backpropagation. X-ray computed tomography datasets were used to characterize pore-structure-related properties of replicated materials, followed by three-dimensional advanced imaging of workable representative volume elements. Hydraulic flow information was acquired for the porous matrices using the constant-head permeameter technique. Experiments showed the permeability and Forchheimer coefficient dependence on pore-structure-related properties for fluid-flowing within the pre-Forchheimer and fully developed Forchheimer regimes. Flow permeability of 8.479 × 10 −09 m 2 was highest in the material with the widest mean pore openings (0.212 mm) and lowest (1.291 × 10 −09 m 2 ) in the material with the narrowest mean pore openings (0.106 mm). Conversely, Forchheimer coefficients were higher for materials with lower porosities and lower for materials with higher porosities. CFD calculations accurately predicted the fluid properties of metallic foams, as well as the influence of intrinsic foam properties on permeability and the Forchheimer coefficient. The ANN model framework was also able to provide valuable information about the hydrodynamics of these materials. Convolution and non-linearity of the ANN model were improved by adding supplementary neurons to the hidden layers allowing deviations within 0.3 and 9.0 percent to be attained.

Evaluating Electrical Resistivity for High Porosity Metals

Theoretical and Experimental Investigation of Flow Rate Characteristics of Sintered Metal Porous Media

Discrete element model for effective electrical conductivity of spark plasma sintered porous materials

Fabrication of a Novel Porous Ni–P Thin-Film Using Electroless-Plating: Application to Embedded Thin-Film Resistor

Pore-level Determination of Spectral Reflection Behaviors of High-Porosity Metal Foam Sheets

Tomography-based Analysis of Apparent Directional Spectral Emissivity of High-Porosity Nickel Foams

Investigation of Tensile Properties and In Situ Analysis of Fracture Behavior in High-Porosity Open-Cell Nickel Foam

Framework for additive manufacturing of porous Inconel 718 for electrochemical applications

A Unified Empirical Equation for Determining the Mechanical Properties of Porous NiTi Alloy: From Nanoporosity to Microporosity

Optimum scheme of continuous electrodeposited porous metal materials

Coulometric Measurement of the Porosity in Thin Nickel Coatings

Estimation of elastic behaviors of metal components containing process induced porosity

Electrochemical Lmpedance Spectroscopy of Porous Nickel Electrode and Its Mathematical Model

On the Hydrodynamics of Macroporous Structures: Experimental, CFD and Artificial Neural Network Analysis

A new method for calculating the specific surface area of porous metal foams

Porosity evolution and oxide formation in bulk nanoporous copper dealloyed from a copper-manganese alloy studied by in situ resistometry

Study on the Mechanical Behavior of Porous Iron Alloy at High Strain Rates

Electrical Conductivity of Nanoscale Hydrophobic Porous Media: Surface Charge Density and Heterogeneous Pore Structure

Experimental investigation of permeability and Darcy-Forchheimer flow transition in metal foam with high pore density

Effect of silicon resistivity on its porosification using metal induced chemical etching

Pore Scale Investigation of Heat Conduction of High Porosity Open-Cell Metal Foam/Paraffin Composite