Abstract:The mechanical properties of nickel-based single crystal superalloys deteriorate with increasing misorientation, thus the finished product rate of the casting of single crystal turbine airfoils may be reduced due to the formation of grain boundaries especially when the misorientation angle exceeds to some extent. To this day, evolution of the microstructures at the grain boundaries with misorientation and the relationship between the microstructures and the mechanical properties are still unclear. In this work a detailed characterization of the misorientation related microstructure at the grain boundary in DD6 single crystal superalloy has been carried out using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques; the elemental distribution at the grain boundaries has been analyzed by energy dispersive (EDS) X-ray mapping; and the effect of precipitation of μ phases at the grain boundary on the mechanical property has been evaluated by finite element calculation. It is shown that the proportion of γ phase at the grain boundaries decreases, while the proportion of γ′ phase at the grain boundaries increases with increasing misorientation; the μ phase is precipitated at the grain boundaries when the misorientation angle exceeds about 10° and thus it could lead to a dramatic deterioration of the mechanical properties, as well as that the enrichment of Re and W gradually disappears as the misorientation angle increases. All these factors may result in the degradation of the mechanical properties at the grain boundaries as the misorientation increases. Furthermore, the finite element calculation confirms that precipitation of μ phases at the grain boundary is responsible for the significant deterioration of the mechanical properties when the misorientation exceeds about 10°. This work provides a physical imaging of the microstructure for understanding the relationship between the mechanical properties and the misorientation of the grain boundaries in the single crystal superalloy. Based on our study we hope that we can offer some scientific basis for further improvement of the nickel-based single crystal superalloys.

A STUDY ON MECHANISM OF MISORIENTED GRAIN GROWTH IN SINGLE-CRYSTAL MANUFACTURE OF DD8 NICKEL BASED SUPERALLOY

Misorientation Related Microstructure at the Grain Boundary in A Nickel-Based Single Crystal Superalloy

Investigation of Grain Competitive Growth During Directional Solidification of Single-Crystal Nickel-Based Superalloys

Competitive Grain Growth Mechanism in Three Dimensions During Directional Solidification of A Nickel-Based Superalloy

Study on the formation and competitive growth mechanism of stray grains during spiral grain selector of nickel-based single crystal superalloy

Analysis of competitive growth mechanism of stray grains of single crystal superalloys during directional solidification process

Mechanism of Heterogeneous Substrate Stimulating Growth for Nickel-Based Single Crystal Superalloy

Grain Orientation Optimization Of Two-Dimensional Grain Selector During Directional Solidification Of Ni-Based Superalloys

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Microstructure Development of Different Orientated Nickel-Base Single Crystal Superalloy in Directional Solidification

Effect of Orientation on the Microstructure of Nickel‐based Crystalline Superalloys

Orientation Control for Nickel-Based Single Crystal Superalloys: Grain Selection Method Assisted by Directional Columnar Grains

Influence of Process Parameter and Alloy Composition on Misoriented Eutectics in Single-Crystal Nickel-Based Superalloys

Influence of crystal orientation on cellular growth of a nickel-base single crystal superalloy

Segregation Behavior of Alloying Elements in Different Oriented Single Crystal Nickel Based Superalloys

On the Anisotropic Milling Machinability of DD407 Single Crystal Nickel-Based Superalloy

Formation and Evolution of Stray Grains on Remelted Interface in the Seed Crystal During the Directional Solidification of Single-Crystal Superalloys Assisted by Vertical Static Magnetic Field

Bi-crystal competitive growth in a nickel-based superalloy during cell/dendrite directional solidification

Research Progress in Crystal Orientation of Single Crystal Superalloys

Investigation on the grain boundary strengthening effect of a nickel‐based superalloy

A new model of competitive grain growth dominated by the solute field of the Nickel-based superalloys during directional solidification