Abstract:Taking Al-2%mole-Cu binary alloy as an example, the influence of grain orientation on competitive growth of dendrites under different competitive modes was investigated by using the three-dimensional (3-D) phase-field method. The result of phase-field simulation was verified by applying cold spray and directional remelting. In the simulation process, two competitive modes were designed: in Scheme 1, the monolayer columnar grains in multilayer columnar crystals had different orientations; while in Scheme 2, they had the same orientation. The simulation result showed that in Scheme 1, the growth of the dendrites, whose orientation had a certain included angle with the direction of temperature gradient, was restrained by the growth of other dendrites whose direction was parallel to the direction of temperature gradient. Moreover, the larger the included angle between the grain orientation and temperature gradient, the earlier the cessation of dendrite growth. The secondary dendrites of dendrites whose grain orientation was parallel to the temperature gradient flourished with increasing included angles between the grain orientation and temperature gradient. In Scheme 2, the greater the included angle between grain orientation and temperature gradient, the easier the dendrites whose orientation showed a certain included angle with temperature gradient inserted between those grew parallel to the temperature gradient, and the better the growth condition thereafter. Some growing dendrites after intercalation were deflected to the temperature gradient, and the greater the included angle, the lower the deflection. The morphologies of the competitive growth dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the two modes of competitive growth of dendrites characterized in the simulation do exist and frequently appear in practical solidification processes.

Research Progress in Crystal Orientation of Single Crystal Superalloys

Effect of Orientation on the Microstructure of Nickel‐based Crystalline Superalloys

A XRD Method to Measure Orientation of Single Crystal Superalloys

Influence of crystal orientation on cellular growth of a nickel-base single crystal superalloy

Insights into the Stable Preferred Growth Direction of Rods in the Colony of Al2O3/ZrO2 (Y2O3) Eutectics

Microstructure Development of Different Orientated Nickel-Base Single Crystal Superalloy in Directional Solidification

Investigation of Grain Competitive Growth During Directional Solidification of Single-Crystal Nickel-Based Superalloys

Study on the formation and competitive growth mechanism of stray grains during spiral grain selector of nickel-based single crystal superalloy

Orientation Control for Nickel-Based Single Crystal Superalloys: Grain Selection Method Assisted by Directional Columnar Grains

Microstructure and orientation variation during cell/dendrite transition in directional solidification of a single crystal nickel-base superalloy

Effect of orientations on in situ tensile deformation and fracture behaviours of nickel-base single-crystal superalloys

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Effects of Crystal Orientation and External Stress on the Static Recrystallization Behavior of an Ni-Based Single-Crystal Superalloy

Crystal growth for different substrate orientations during laser directed solidification of single crystal superalloys

Bi-crystal competitive growth in a nickel-based superalloy during cell/dendrite directional solidification

Segregation Behavior of Alloying Elements in Different Oriented Single Crystal Nickel Based Superalloys

Crystal Orientation Effect on Fretting Fatigue Induced Geometrically Necessary Dislocation Distribution in Ni-based Single-Crystal Superalloys

Competitive Grain Growth Mechanism in Three Dimensions During Directional Solidification of A Nickel-Based Superalloy

Phase-field-crystal Simulation of Nano-Single Crystal Microcrack Propagation under Different Orientation Angles

The effect of crystal orientation on fretting fatigue crack formation in Ni-based single-crystal superalloys: In-situ SEM observation and crystal plasticity finite element simulation

Analysis of competitive growth mechanism of stray grains of single crystal superalloys during directional solidification process