Abstract:Taking horizontal twin-roll casting mill as the research object, the geometric modeling and gridding of the rolling mill are completed by using the design modeler and gridding module of ANSYS Wrkbench platform. Combined with Fluent fluid simulation module, a two-dimensional steady-state laminar flow coupled model of copper-aluminium clad plate cast-rolling process was established. Through the analysis of range data obtained by orthogonal simulation design method, the order of importance of each factor is as follows: billet speed, cast-rolling zone length, preheating temperature of copper strip, pouring temperature. Through the analysis of factors and indicators (liquid hole depth ratio), the suitable technological parameters range are 0.3~0.6 m.min-1 for billet speed, 933~993 K for pouring temperature, 300~431 K for preheating temperature of copper strip, 57~80 mm for cast-rolling zone length. In order to verify the reliability of numerical simulation method and result analysis, the casting-rolling test was carried out with simulated process parameters. The exit temperature was measured by thermocouple. The results show that the error between simulation results and measured results is small, which verifies the accuracy of simulation and the feasibility of guiding production. When the billet speed is 0.5 m/min, the pouring temperature is 963 K, the length of casting-rolling zone is 70 mm and the copper strip is not preheated, the 10 mm thick copper-aluminium composite plate has better shape. The tensile properties show that the composite plate has both the high plasticity of aluminium and the high strength of copper.

NUMERICAL SIMULATION OF FLOW, TEMPERATURE AND THERMAL STRESS FIELDS DURING TWIN-ROLL CASTING PROCESS

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Numerical simulation on flow and heat transfer in twin roll strip casting and rolling molten pool with side dams vibrating

Numerical Simulation of Molten Pool and Control Strategy of Kiss Point in a Twin-Roll Strip Casting Process

Simulation and application of dynamic heat transfer model for improvement of continuous casting process

Numerical Simulation of the Solidification Process of a Heavy Roll Stand for Temperature Field and Thermal Stress Field

Application of Modeling and Simulation of Thermal Stress in Solidification Process of a Heavy Steel Casting

A Study on the Numerical Simulation of Thermal Stress During the Solidification of Shaped Castings

Numerical Simulation of Solidification and Heat Transfer in Continuously Cast Bloom

Analysis of heat transfer and thermal stress in continuous casting with mechanical reduction

3D Transient Heat Transfer Simulation and Optimization for Initial Stage of Steel Continuous Casting Process

Numerical Simulation and Experiments Research on Secondary Cooling Process of Thick Slab Continuous Casting

Numerical Simulation of the Thermo-Mechanical Process for Beam Blank Continuous Casting

Numerical Simulation of Fluid Flow and Solidification in Continuous Slab Casting Mould Based on Inverse Heat Transfer Calculation

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Numerical Simulation of Thermal Stresses of Castings During Solidification Based on Personal Computer and Its Engineering Application

Progress in numerical simulation of casting process

Numerical Simulation Research on the Temperature Field and Hot Roll Crown Model of Hot Continuous Rolling Mills

Thermal stress simulation considering mechanical interaction between casting and mold

Numerical Simulation of Cast-rolling Process for Copper-Aluminum Composite Plate