Abstract:It is assumed that heat-assisted magnetic recording (HAMR) is the recording technique of the future. For pure hard magnetic grains in high density media with an average diameter of $5$nm and a height of $10$nm the switching probability is not sufficiently high for the use in bit-patterned media. Using a bilayer structure with 50$\%$ hard magnetic material with low Curie temperature and 50$\%$ soft magnetic material with high Curie temperature to obtain more than 99.2$\%$ switching probability, leads to very large jitter. We propose an optimized material composition to reach a switching probability of $P_{\mathrm{switch}}>99.2\%$ and simultaneously achieve the narrow transition jitter of pure hard magnetic material. Simulations with a continuous laser spot were performed with the atomistic simulation program VAMPIRE for a single cylindrical recording grain with a diameter of 5nm and a height of 10nm. Different configurations of soft magnetic material and different amounts of hard and soft magnetic material were tested and discussed. Within our analysis, a composition with 20$\%$ soft magnetic and $80\%$ hard magnetic material reaches the best results with a switching probability $P_{\mathrm{switch}}>99.2\%$, an off-track jitter parameter $\sigma_{\mathrm{off},80/20}=14.2$K and a down-track jitter parameter $\sigma_{\mathrm{down},80/20}=0.49$nm.

Medium Noise in Longitudinal Thin Film Disk Media above 20 Gb/In(2)

Micromagnetic Analysis of Transition Noise for High-Density Perpendicular Recording

Medium noise and error rate in ultrahigh density computer hard disk systems

Micromagnetic Studies of Density Limit in Polycrystalline Recording Media

Recording, noise, and servo characteristics of patterned thin film media

Magnetic Film Thickness Effects on the Recording Performance of Perpendicular Media

Isolated Pulse Distortion and Medium Noise Analysis for Submicrometer-Width Narrow-Track Recording

General analysis of noise in recorded transitions in thin film recording media

Write Linear Density Limit in Longitudinal Thin Film Media

Micromagnetic Studies Of Recording Process In Patterned Magnetic Media

Dynamic Simulation of High-Density Perpendicular Recording Head and Media Combination

Magnetization fluctuations in uniformly magnetized thin-film recording media

Perspective of read heads for ultra-high recording densities and associated noise issues

Track Edge and Zero-frequency Noise in Isotropic and Oriented Thin Film Media with Large Skew Angles.

Micromagnetic Studies for Bit Patterned Media above 2 Tbit/In.(2)

Noise reduction in heat-assisted magnetic recording by optimizing a high/low Tc bilayer structure

Impact of Media Design on Track Edge in Perpendicular Magnetic Recording

High K/sub u/ materials approach to 100 Gbits/in/sup 2/

Stable ultrahigh-density magneto-optical recordings using introduced linear defects

AC noise reduction based on exchange coupled grains for heat-assisted-magnetic recording: The effect of an FeRh interlayer

Calculation Of Dynamic Write Field For Perpendicular Recording Head