Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

A new method for determining tire traction on ice

Research on simplified tire finite element modeling and simulation method

Identification of Tire-road Adhesion State on Complicated Road Surface for Traction Control System

Tire-road friction estimation and traction control strategy for motorized electric vehicle

Study on the Dynamic Characteristics of Automobile Tire

A Dynamic Model for Tire/Road Friction Estimation under Combined Longitudinal/Lateral Slip Situation

Study on Deicing Mechanism of High-elastic/salt-storage Functional Pavement

Practical active traction control for independent‐wheel‐drive electric vehicle based on slip‐ratio threshold determination

Modeling aircraft braking performance on wet and snow/ice-contaminated runways

Numerical analysis on tractive performance of off-road tire on gravel road using a calibrated finite element method–discrete element method model and experimental validation

Evaluation of Vehicle Braking Performance on Wet Pavement Surface using an Integrated Tire-Vehicle Modeling Approach

Tire/Wheel Torsional Dynamic Behaviour and Road Friction Coefficient Estimation

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

State of the Art for Tire Dynamical Model Research

Wheel Slip Control Using Sliding-Mode Technique and Maximum Transmissible Torque Estimation

A Spoke Strain-Based Method to Estimate Tire Condition Parameters for Intelligent Tires

Road Sensing with Intelligent Tires for Driving Assistance Applications

A Theoretical Model for the Tread Slip and the Effective Rolling Radius of the Tyres in Free Rolling

Effect of the experimental parameters on the ice-asphalt adhesion strength and corresponding theoretical model based on the energy-balanced principle

A THREE-DIMENSIONAL TIRE RING ON ELASTIC FOUNDATION MODEL IN ROLLING CONTACT WITH APPLICATION TO INTELLIGENT TIRES

Traction Control System for EV Based on Modified Maximum Transmissible Torque Estimation