Abstract:Despite the non-contact underwater explosion phenomena (UNDEX) have been studied for decades and several numerical methods have been proposed in literature, its effects on military structures, especially composite ones, are even nowadays matter of research. In early design phases, it is not always possible to verify the shock resistance of hull structures modelling the whole phenomenon, in which fluid, gas and solid properties must be properly set in a fully coupled fluid-structure interaction (FSI) numerical model. These ones are extremely complex to set, computationally demanding and certainly not suitable for everyday design practice. In this paper, a simplified finite element (FE) model, easy to use in an early design phase, is proposed. Both, the structure and the fluid are simulated. In this approximation, the fluid behaviour is simplified, using special finite elements, available in a commercial software environment. This choice reduces the computational time and numerical efforts avoiding the problem of combining computational fluid dynamics (CFD) and FE domains and equations in a fully coupled fluid-structure interaction model. A typical parallel body block of a minesweeper is modelled, using two-dimensional multi-layered shell elements to properly account for the composite materials behaviour. For the fluid instead, three dimensional volumetric elements, directly coupled to the structural elements, are placed. In addition, the same calculation is performed, modelling separately fluid in the CFD environment and structures in the finite element one. Thus, realizing a fully coupled fluid-structure interaction model. The results obtained by applying both numerical models are compared with the structural response measured on board of a composite ship during a full-scale shock test. The simplified proposed procedure provides results in satisfactory agreement with experiments, allowing the validation of the model. Approximations are discussed and differences with the real phenomenon and fully coupled CFD+FE method are shown, providing a better understanding of the phenomena. Eventually, the modelling strategy has been considered a valuable and cost-effective tool for the concept and preliminary design of composite structures subject to underwater explosions.

Simplified method for analyzing the response of GRP ship to underwater explosion

Numerical Simulation and Response of a Composite Mine Countermeasure Ship Section Subjected to Noncontact Underwater Explosion

Underwater explosion research on ship with polymer hull coating

A Novel Efficient Method to Evaluate the Dynamic Response of Laminated Plates Subjected to Underwater Shock

Underwater Explosion Approximate Method Research on Ship with Polymer Coating

An analytical method for evaluating the dynamic response of plates subjected to underwater shock employing Mindlin plate theory and Laplace transforms

Underwater explosion tests and simulation for ships with hyper-elastic coating

A Semi-Analytical Method to Evaluate the Dynamic Response of Functionally Graded Plates Subjected to Underwater Shock

COMPARISON ON STRUCTURAL PERFORMANCE OF FRP HULLS UNDER EQUIVALENT EXPLOSION LOADING

Study on critical condition of damage mode of local grillage structure under near-field underwater explosion

Experimental Investigation on the Dynamic Response of Scaled Ship Model with Rubber Sandwich Coatings Subjected to Underwater Explosion

Numerical simulation of CBF materials ship structure's response subjected to underwater explosion

Dynamic Response of Warship Structure under Air Non-contact Explosion

Dynamic response of composite tube reinforced porous polyurethane structures under underwater blast loading

A Design Approach to Assess Effects of Non-Contact Underwater Explosions on Naval Composite Vessels

Study on structural damage mechanisms and defence of rectangular closed-section simplified hull girders with thinner plates under near-field underwater explosions

Experimental Research on the Dynamic Response of Floating Structures with Coatings Subjected to Underwater Explosion

Numerical Simulation of Structural Responses of a Ship Suffering Underwater Explosion

Dynamic response and shock resistance of layered claddings subjected to a non-contact underwater explosion

Experimental investigations on small-and full-scale ship models with polyurea coatings subjected to underwater explosion

A Fluid-structure Coupling and Dynamic Model of Ship Anti-shock Layer for Underwater Explosion Wave Isolation