Abstract:Despite the non-contact underwater explosion phenomena (UNDEX) have been studied for decades and several numerical methods have been proposed in literature, its effects on military structures, especially composite ones, are even nowadays matter of research. In early design phases, it is not always possible to verify the shock resistance of hull structures modelling the whole phenomenon, in which fluid, gas and solid properties must be properly set in a fully coupled fluid-structure interaction (FSI) numerical model. These ones are extremely complex to set, computationally demanding and certainly not suitable for everyday design practice. In this paper, a simplified finite element (FE) model, easy to use in an early design phase, is proposed. Both, the structure and the fluid are simulated. In this approximation, the fluid behaviour is simplified, using special finite elements, available in a commercial software environment. This choice reduces the computational time and numerical efforts avoiding the problem of combining computational fluid dynamics (CFD) and FE domains and equations in a fully coupled fluid-structure interaction model. A typical parallel body block of a minesweeper is modelled, using two-dimensional multi-layered shell elements to properly account for the composite materials behaviour. For the fluid instead, three dimensional volumetric elements, directly coupled to the structural elements, are placed. In addition, the same calculation is performed, modelling separately fluid in the CFD environment and structures in the finite element one. Thus, realizing a fully coupled fluid-structure interaction model. The results obtained by applying both numerical models are compared with the structural response measured on board of a composite ship during a full-scale shock test. The simplified proposed procedure provides results in satisfactory agreement with experiments, allowing the validation of the model. Approximations are discussed and differences with the real phenomenon and fully coupled CFD+FE method are shown, providing a better understanding of the phenomena. Eventually, the modelling strategy has been considered a valuable and cost-effective tool for the concept and preliminary design of composite structures subject to underwater explosions.

Underwater explosion tests and simulation for ships with hyper-elastic coating

Experimental Research on the Dynamic Response of Floating Structures with Coatings Subjected to Underwater Explosion

Experimental investigations on small-and full-scale ship models with polyurea coatings subjected to underwater explosion

A Novel Efficient Method to Evaluate the Dynamic Response of Laminated Plates Subjected to Underwater Shock

A Fluid-Structure Coupled Computational Model for the Certification of Shock-Resistant Elastomer Coatings

Analysis of Damage Regularity of Single-Shell Submarine Subject to Typical Weapons' Attacking

Coupled Computational Fluid Dynamics-Discrete Element Method for Simulating the Interactions Between Ship-Induced Waves and Riprap on Restricted Waterway Banks

A Design Approach to Assess Effects of Non-Contact Underwater Explosions on Naval Composite Vessels

Damage mechanisms of full-scale ship under near-field underwater explosion

Dynamic response of hull girder subjected to combined underwater explosion and wave induced load

Dynamic response of composite tube reinforced porous polyurethane structures under underwater blast loading

Survey on Experimental and Numerical Approaches to Model Underwater Explosions

Response of polyurea-coated flat composite plates to underwater explosive loading

Cavitation effects near a sacrificial coating subjected to underwater explosion

Dynamic Response of a Warship's Metal-Jet-Damaged Double-Layer Plates Subjected to the Subsequent Underwater Explosion

Numerical Simulation of Dynamic Response of Steel Plate Subjected to Multiple Underwater Explosions

On the interaction between the underwater explosion and the double-layer structure with an orifice on the outer plate

Study on structural damage mechanisms and defence of rectangular closed-section simplified hull girders with thinner plates under near-field underwater explosions

The Fluid-Solid Interaction Dynamics between Underwater Explosion Bubble and Corrugated Sandwich Plate

Numerical Simulations and Tests Investigation in UNDEX on Isolation Performance of Catamaran

Nonlinear similarity characterisation and validation of dynamic response of ship stiffened plate structure under explosion load impacts