Abstract:Despite the non-contact underwater explosion phenomena (UNDEX) have been studied for decades and several numerical methods have been proposed in literature, its effects on military structures, especially composite ones, are even nowadays matter of research. In early design phases, it is not always possible to verify the shock resistance of hull structures modelling the whole phenomenon, in which fluid, gas and solid properties must be properly set in a fully coupled fluid-structure interaction (FSI) numerical model. These ones are extremely complex to set, computationally demanding and certainly not suitable for everyday design practice. In this paper, a simplified finite element (FE) model, easy to use in an early design phase, is proposed. Both, the structure and the fluid are simulated. In this approximation, the fluid behaviour is simplified, using special finite elements, available in a commercial software environment. This choice reduces the computational time and numerical efforts avoiding the problem of combining computational fluid dynamics (CFD) and FE domains and equations in a fully coupled fluid-structure interaction model. A typical parallel body block of a minesweeper is modelled, using two-dimensional multi-layered shell elements to properly account for the composite materials behaviour. For the fluid instead, three dimensional volumetric elements, directly coupled to the structural elements, are placed. In addition, the same calculation is performed, modelling separately fluid in the CFD environment and structures in the finite element one. Thus, realizing a fully coupled fluid-structure interaction model. The results obtained by applying both numerical models are compared with the structural response measured on board of a composite ship during a full-scale shock test. The simplified proposed procedure provides results in satisfactory agreement with experiments, allowing the validation of the model. Approximations are discussed and differences with the real phenomenon and fully coupled CFD+FE method are shown, providing a better understanding of the phenomena. Eventually, the modelling strategy has been considered a valuable and cost-effective tool for the concept and preliminary design of composite structures subject to underwater explosions.

Experimental Research on the Dynamic Response of Floating Structures with Coatings Subjected to Underwater Explosion

A Novel Efficient Method to Evaluate the Dynamic Response of Laminated Plates Subjected to Underwater Shock

Analysis of Damage Regularity of Single-Shell Submarine Subject to Typical Weapons' Attacking

A Fluid-Structure Coupled Computational Model for the Certification of Shock-Resistant Elastomer Coatings

Dynamic Response of a Warship's Metal-Jet-Damaged Double-Layer Plates Subjected to the Subsequent Underwater Explosion

Dynamic response of composite tube reinforced porous polyurethane structures under underwater blast loading

Experimental investigations on small-and full-scale ship models with polyurea coatings subjected to underwater explosion

On the interaction between the underwater explosion and the double-layer structure with an orifice on the outer plate

An analytical method for evaluating the dynamic response of plates subjected to underwater shock employing Mindlin plate theory and Laplace transforms

Cavitation effects near a sacrificial coating subjected to underwater explosion

The Fluid-Solid Interaction Dynamics between Underwater Explosion Bubble and Corrugated Sandwich Plate

Numerical Simulation of Dynamic Response of Steel Plate Subjected to Multiple Underwater Explosions

Contact underwater explosion response of metallic sandwich panels with different face-sheet configurations and core materials

Dynamic Responses Of Ultralight All-Metallic Honeycomb Sandwich Panels Under Fully Confined Blast Loading

Effects of Connecting Structures in Double-Hulled Water-Filled Cylindrical Shells on Shock Wave Propagation and the Structural Response to Underwater Explosion

Centrifuge Experiment and Numerical Analysis of an Air-Backed Plate Subjected to Underwater Shock Loading

Numerical Investigation of Concrete-Filled Double Skin Steel Tubular (CFDST) Structure Subjected to Underwater Explosion Loading

A Design Approach to Assess Effects of Non-Contact Underwater Explosions on Naval Composite Vessels

Dynamic response of composite sandwich structures with the honeycomb-foam hybrid core subjected to underwater shock waves: Numerical simulations

Dynamic response of hull girder subjected to combined underwater explosion and wave induced load

Response of polyurea-coated flat composite plates to underwater explosive loading