Abstract:Pulsed laser welding of SUS 304 stainless steel under different laser focusing conditions was performed in this study. A multi-information synchronous monitoring system was developed in experiment. The electron temperature signal, audible acoustic signal and acoustic emission signal were detected in pulsed laser welding to characterize the behavior of plasma plume. The fluctuation of physical characteristic parameters was calculated to analyze the influence of focusing condition on the welding thermal effect and laser induced plasma. The results showed that the focusing condition results in different energy absorption behavior of plasma in heat conduction welding mode and deep penetration welding mode. The energy absorption behavior of plasma to laser beam can be characterized by plasma signals and physical characteristic parameters effectively. The keyhole effect and energy density distribution of the laser beam acting on the materials, which closely relate to the focusing condition, are important factors to affect the energy absorption mechanism of plasma plume. With sufficient laser energy density and no keyhole effect, a strong plasma plume may be induced in heat conduction welding mode. High intensity plasma plume above the molten pool promotes the inverse bremsstrahlung absorption effect in laser welding, which shields the effective absorption of materials to laser energy. But the keyhole effect contributes to the absorption efficiency of the materials to the energy of plasma and laser. Once the energy density of laser beam is enough to induce keyhole effect, the inverse bremsstrahlung absorption effect of plasma is attenuated.

Study on Mechanism of Laser-induced Plasma during YAG-pulse Laser Welding

Study on the Acoustic Emission Effect of Plasma Plume in Pulsed Laser Welding

Study of plasma control in high-power CO2 laser welding

Behavior and Spectrum Analysis of Welding Arc in Low-Power YAG-Laser–MAG Hybrid-Welding Process

Mechanism and Mathematical Model of the Laser-induced Plasma Currentin Laser Welding

Spectral Characteristics of Arc Plasma During Laser-Arc Double-Sided Welding for Aluminum Alloy

Mechanism, Modeling, and Application of Plasma Current in Deep-Penetration Laser Welding

The Behavior and Its Control of Plasma Produced During Laser Welding

Simulation of Photoinduced Plasma Behavior in Laser Penetration Welding

Plasma control in high-power CO2 laser welding

An analysis of Plasma Phenomena and Influencing Factors of Plasma in High Power Laser Welding

Interaction between laser-induced plasma/vapor and arc plasma during fiber laser-MIG hybrid welding

Effect of laser parameters on arc behavior of laser-TIG double-side welding for aluminum alloy

Study of plasma in laser welding of magnesium alloy

Effect of Focusing Condition on Laser Energy Absorption Characteristics in Pulsed Laser Welding

Investigation of Plasma and Metal Transfer Dynamic Behavior During Fiber Laser GMAW-P Hybrid Welding

Study on Attraction of Laser to Arc Plasma in Laser-TIG Hybrid Welding on Magnesium Alloy

Analysis of laser induced plasma behavior and process stability in high power CO_2 laser welding of homemade ship plate

Effects of Pulsing Parameters on Weld Shape Parameters During Pulsed Nd-YAG Laser Welding of Aluminum Alloys

Study on the periodic oscillation of plasma/vapour induced during high power fibre laser penetration welding

Detection of laser-induced plasma for high-power laser beam welding