Abstract:Pulsed wave (PW) mode laser welding is often preferred under conditions where specific heat input and tailorable cooling rate are required. Previous works on numerical modelling of laser welding mainly focus on continuous wave (CW) mode, while physical understanding of PW mode from numerical investigation is scarce. In this work, a 3D multi-physics thermal fluid model is developed considering both CW and PW modes laser welding. The main physical factors involving heat transfer, thermal fluid flow, Fresnel absorption, recoil pressure induced by metal evaporation, Marangoni effect driven by surface tension, free surface tracing, and laser multiple reflections inside the keyhole are included in this model. The model is tested and validated against the corresponding experimental results for laser welds of stainless steel 316 L. The simulated weld fusion cross sections and surface molten pool agree well with the experimentally observed results for both CW and PW modes. The results show that PW mode exhibits a higher depth of penetration and a smaller molten pool at the same heat input with CW mode. In CW mode laser welding, the shape of keyhole is unstable, while its depth keeps relatively stable. There are two main flow patterns in the molten pool of CW mode welding: an outward flow from keyhole outlet to the rear weld pool and a clockwise flow from the keyhole tip to the rear weld pool. While for PW mode, keyhole and molten pool show periodic behaviors with a period of the laser energy output used. The periodic fluid flow pattern is mainly affected by the gradually changed surface tension and suddenly changed recoil pressure. Furthermore, it is found that a finer microstructure with a smaller secondary dendrite arm spacing is obtained in PW mode due to a higher cooling rate from both the calculated and experimentally measured results.

Mechanism and Mathematical Model of the Laser-induced Plasma Currentin Laser Welding

Mechanism, Modeling, and Application of Plasma Current in Deep-Penetration Laser Welding

Simple Plasma Current Model and Its Application in Laser Beam Welding

The Behavior and Its Control of Plasma Produced During Laser Welding

Numerical study of thermal fluid dynamics and solidification characteristics during continuous wave and pulsed wave laser welding

Three-Dimensional Transient Simulation of Laser Deep-penetration Welding Based on Combined Heat Source

ICONE19-43939 Phenomenological Evaluation of Laser-Irradiated Welding Processes with a Combined Use of Higher-Accuracy Experiments and Computational Science Methodologies : (5) Numerical Simulation of the Welding Processes with a Multi-Dimensional Multi-Physics Analysis Code SPLICE

Numerical simulation of the molten pool character in high power fiber laser welding

Numerical Simulation on Temperature Field in Laser-Plasma Arc Hybrid Welding

Calculation and Detection of Thermal Cycle of Laser Deep Penetration Welding

Numerical Simulation on Flow and Heat Transfer in Weld Pool of Laser-Plasma Hybrid Welding

Some aspects of the fluid dynamics of laser welding

Numerical simulations of oscillating laser welding: A review

Understanding the Effect of Oxygen on Weld Pool and Keyhole in Laser Beam Welding

Thermoelectric Currents and Thermoelectric-Magnetic Effects in Full-Penetration Laser Beam Welding of Aluminum Alloy with Magnetic Field Support

A new finite element model accounting for thermal contact conductance in laser transmission welding of thermoplastics

Numerical analysis on the temperature field in laser-plasma hybrid welding of an aluminum alloy

Numerical analysis of the effect of an oscillating metal vapor plume on the keyhole and molten pool behavior during deep penetration laser beam welding

Three-Dimensional Numerical Simulation on the Flow and Heat Transfer in the Welding Pool of Laser-Plasma Hybrid Welding

A Physically Motivated Heat Source Model for Laser Beam Welding

Influence of the free surface reconstruction on the spatial laser energy distribution in high power laser beam welding modeling