Abstract:Microwave radiometers can be used in human tissue temperature measurement scenarios due to the advantages of non-destructive and non-contact temperature measurement. However, their accuracy often cannot meet the needs of practical applications. In this paper, a Ku-Band high-precision blackbody calibration target is designed to provide calibration for microwave radiometers and meet the requirements of a high temperature-measurement accuracy and high temperature-measurement resolution. From a practical application point of view, the blackbody calibration target needs to have the characteristics of high emissivity and high temperature uniformity. However, previous studies on blackbody calibration targets often focused on the scattering characteristics or temperature uniformity of the calibration target separately, and thus lack a comprehensive consideration of the two characteristics. In this paper, the electromagnetic scattering model and the temperature-distribution model of the calibration target are established through the multi-physical simulation combined with the Finite Element Method. Then, according to the simulation results of the two characteristic models, the structural parameters and composition of the coated cone array are continuously optimized. In addition, to achieve high-precision temperature control of the blackbody calibration target, this paper studies three PID controller parameter self-tuning algorithms, namely, BP-PID, PSO-PID and Fuzzy-PID for the optimal parameter tuning problem of traditional PID algorithms and determines the optimal temperature-control algorithm by comparing the performance of heating and cooling processes. Then, the blackbody calibration target is processed and manufactured. The arch test system is used to validate the reflectance of the calibration target, the emissivity is calculated indirectly, and the temperature-distribution uniformity of the temperature-control panel of the calibration target is tested by a multi-point distribution method. Finally, the uncertainty of the brightness temperature of the blackbody calibration target is analyzed.

A Hot Calibration Load of Measuring and Controlling Temperature

Study on MWR Hot Calibration Load and Its Simulation

An Efficient Temperature Calibration Method Based on the Improved Infrared Forward Model and Bayesian Inference

Analysis of Multi-Factor on Measurement Improvement of an Infrared Imager in Low-Temperature Environments

Feasibility Analysis on Radiant Transient Heat Flux Meter Calibration System

Temperature-Automated Calibration Methods for a Large-Area Blackbody Radiation Source

Design and Implementation of a Ku-Band High-Precision Blackbody Calibration Target

Modeling Analysis and Experimental Study of a Temperature-difference Type Heat Flux Meter

Study on the Method of Use Hot-Box to Calibrate Heat Flux Sensor

Research on Large-Area Blackbody Radiation Source for Infrared Remote Sensor Calibration

Matched Loading For Calibration Of Passive Matrix Millimeter Wave Imaging System

High temperature imaging dynamic measurement techniques under harsh experimental environment

Design of Infrared Transfer Standard Radiometer for Medium and Low Temperature Blackbody Calibration

Measuring the High Temperature Distribution of a Molybdenum Bar with an Un-Cooled Color CCD Sensor

Measuring Non-Equilibrium and Temperature-Dependent Thermal Emitters

Design and Calibration of a Novel Transient Radiative Heat Flux Meter for a Spacecraft Thermal Test.

Measurement of Three-Dimensional Temperature Distribution in an Absorbing, Emitting, and Anisotropically Scattering Medium

Calibration of CCD Temperature Measurement System Based on RGB Digital Filtering in Laser Cladding

The Use of Cooled Axial Conduction Guarded Probe for the Measurement of Transient Heat Flux by Calibrating the Unit Step Response

Measurements of Temperature and Emissivity Distributions on a High-Temperature Surface Using an Auxiliary Light Source Method

Modeling and Accuracy Analysis of Hot Disk Thermal Constants Analyzer