Abstract:In this study, the effect of TiCN and WC-Co coatings on the tribological performance of spheroidal graphite cast iron materials was investigated by wear tests under dry and lubricated conditions. The mechanical and physical effects of the coating processes were analysed by microhardness measurements and visual methods (SEM, EDX, XRD). The tribological effect of WC-Co and TiCN coated specimens were investigated by ball-on-plate wear tests carried out under dry and boron oil emulsion (5% concentration) conditions at 50 N load and 60 rpm sliding speed parameters. The friction coefficient and wear volume results were obtained to investigate the effect of the coating process and boron oil emulsion on friction and wear behaviour. The wear mechanisms were determined with SEM images obtained from the worn surfaces and surfaces analysed elementally with EDX images. Additionally, surface morphology was examined with surface roughness measurements and 2D–3D topography images. According to the microhardness measurement results, it was observed that the spheroidal graphite cast iron with 290 HV hardness reached 1559 HV with TiCN coating and 1440 HV with WC-Co coating. According to the wear test results, it was determined that TiCN and WC-Co coatings decreased the friction coefficient by 32.51% and 12.80%, respectively. When the effect of boron oil usage compared to dry environmental conditions, it was concluded that the friction coefficient and wear volume decreased by a maximum of 54.80% and 53.70%, respectively. Additionally, the roughness values decreased in the experiments where the boron oil emulsion was used. However, although the TiCN coating improved the surface quality, the WC coating negatively affected the surface quality. Surface form images obtained with 2D and 3D topography also support the alteration in roughness values.

Influence of Counterpair Volume Ratio on Dry Tribological Properties of Cast Iron

Tribological Characteristics of Silicon Nitride-chilled Cast Iron with Oil-less Lubrication

A Comparative Investigation of the Tribological Behavior and Wear Mechanism of Bronze-graphite Composite under Dry- and Water-lubricated Sliding Against Steel

Tribological characteristics of compacted graphite cast iron in dry sliding condition

Investigation Of Tribological Properties Of Brake Shoe Materials - Phosphorus Cast Irons With Different Graphite Morphologies

Tribological properties of compacted graphite cast iron bearing vanadium under dry sliding

Research on the tribological properties of railroad brake shoes made of compacted graphite cast iron

The Influence of Temperature and Load on Dry Sliding Wear and Friction Property of Low Metallic Friction Material

Study on friction and wear behavior of gray cast iron with different carbon content at different temperatures

Effect of the Material and Sliding Rate of the Counterface on the Tribotechnical Properties of a CM(Ti–Mo–BN)–Steel Friction Pair

Study on the worn surface layers of the friction pair consisting of semimetallic friction materials and grey cast iron

Effect of Frictional Pair Materials on Tribological Behavior of Molybdenum Dithiocarbomate As an Additive

Sliding Wear of Cast-Iron Coatings and Cast-Iron-cast-iron Pairs in Lubricated Contact

Investigation on the effect mechanism of oxidation on the tribological performance of cast steel /copper matrix composite

Tribological Dependence of the High-Performance Ferrous-Based Coating on Different Coating Counterparts in Engine Oil

Effect of Type and Content of Iron Powder on the Formation of Oxidized Film and Tribological Properties of Cu-matrix Composites

Effects of Lubricants on Friction and Wear of Ti(Cn)/1045 Steel Sliding Pairs

Wear and Contact Temperature Evolution in Pin-on-Disc Tribotesting of Low-Metallic Friction Material Sliding Against Pearlitic Cast Iron

Influences of counterparts on the high-temperature tribological properties and glaze layer formation of pre-oxidized cobalt-based alloys

Influence of the chemical composition of the material and the physical and mechanical properties of the coating on the wear resistance of the "shaft — coating — bearing bush" tribological coupling

Investigation of wear behavior of carbide based coated rolling roll materials under dry and lubricated conditions