Abstract:Spectral emissivity is one of the most important parameters of metal radiation, with considerable influence on heat-transfer calculations, infrared signatures, pyrometry, and other high-temperature fields. Therefore, a computational model that can accurately calculate the emissivity of metal surfaces is crucial in these fields. In this study, a modified ray-tracing method was proposed to predict the normal spectral emissivity of a rough metal surface. In contrast to other methods involving a complex refractive index, this approach uses the known spectral emissivity of smooth surfaces as an input to avoid using complex refractive index data, which are more difficult to obtain. In addition to the emissivity data of pure Co and advanced high-strength steels samples (DP980) in the literature, emissivity measurements were conducted on GH5188 superalloy with different roughness values to further verify the modified ray-tracing method. A comparison of the measurement and prediction results revealed the high accuracy of the modified ray-tracing method, with the average and maximum errors of 1.92 % and 9.49 %, respectively, which are within the applicable range. As the new method is based on a geometric optics approximation ray-tracing approach, the model is primarily applicable to short-wavelength bands. Additionally, it has been observed in practical use for cases with low roughness. Moreover, some cases with long wavelength bands that exceed the geometric approximation can still yield highly accurate predictive results. When examining the distinction among various processing methods, higher accuracy can be achieved through two-dimensional measurements of the actual surface for prediction. In contrast, simplified methods, such as using one-dimensional cross-sections or surfaces generated based on the surface roughness for the prediction, yield less precise results.

An Improvement on the Prediction of Optical Constants and Radiative Properties by Introducing an Expression for the Damping Frequency in Drude Model

Determination of the optical constants of polymer light-emitting diode films from single reflection measurements

Prediction of the normal spectral emissivity of metals with different surface roughness using a modified ray-tracing method

Single-layer Heat Mirror Films and an Improved Method for Evaluation of Its Optical and Radiative Properties in Infrared

Study on the Composite Dispersion Model of Optical Constants of Metal-Oxide Films in the Range from Ultraviolet to Near Infrared

Optical properties of metals: Infrared emissivity in the anomalous skin effect spectral region

A Further Discussion on the Effective Thermal Conductivity of Metal Foam: an Improved Model

Modeling the effects of surface roughness on the emissivity of aluminum alloys

The Calculated Dielectric Function and Optical Properties of Bimetallic Alloy Nanoparticles

A Modified BRDF Model Based on Cauchy-Lorentz Distribution Theory for Metal and Coating Materials

Modified Debye Model Parameters Of Metals Applicable For Broadband Calculations

Highly accurate prediction of material optical properties based on density functional theory

First-principles Predictions of Temperature-Dependent Infrared Dielectric Function of Polar Materials by Including Four-Phonon Scattering and Phonon Frequency Shift

Prediction of Thermal Conductivity of Micro/nano Porous Dielectric Materials: Theoretical Model and Impact Factors

Study on infrared emissivity model based on perturbation method and Kirchhoff approximation and its application in aluminum alloy welding

A METHOD FOR OBTAINING THE DIRECTIONAL EMISSIVITY OF THE POLISHED METAL SURFACE

Improved Reverse Monte Carlo Analysis of Optical Property of Fe and Ni from Reflection Electron Energy Loss Spectroscopy Spectra

Cost-effective method for computational prediction of thermal conductivity in optical materials based on cubic oxides

Research on the Thermal Conductivity of Metals Based on First Principles

Model of bidirectional reflectance distribution function for metallic materials

Thermal conductivity and Lorenz ratio of metals at intermediate temperatures with mode-level first-principles analysis