Abstract:Spectral emissivity is one of the most important parameters of metal radiation, with considerable influence on heat-transfer calculations, infrared signatures, pyrometry, and other high-temperature fields. Therefore, a computational model that can accurately calculate the emissivity of metal surfaces is crucial in these fields. In this study, a modified ray-tracing method was proposed to predict the normal spectral emissivity of a rough metal surface. In contrast to other methods involving a complex refractive index, this approach uses the known spectral emissivity of smooth surfaces as an input to avoid using complex refractive index data, which are more difficult to obtain. In addition to the emissivity data of pure Co and advanced high-strength steels samples (DP980) in the literature, emissivity measurements were conducted on GH5188 superalloy with different roughness values to further verify the modified ray-tracing method. A comparison of the measurement and prediction results revealed the high accuracy of the modified ray-tracing method, with the average and maximum errors of 1.92 % and 9.49 %, respectively, which are within the applicable range. As the new method is based on a geometric optics approximation ray-tracing approach, the model is primarily applicable to short-wavelength bands. Additionally, it has been observed in practical use for cases with low roughness. Moreover, some cases with long wavelength bands that exceed the geometric approximation can still yield highly accurate predictive results. When examining the distinction among various processing methods, higher accuracy can be achieved through two-dimensional measurements of the actual surface for prediction. In contrast, simplified methods, such as using one-dimensional cross-sections or surfaces generated based on the surface roughness for the prediction, yield less precise results.

Optical properties of metals: Infrared emissivity in the anomalous skin effect spectral region

Experimental verification of the anomalous skin effect in copper using emissivity measurements

Emissivity measurements on noble metals: validation of a free-electron description including the anomalous skin effect

Spectral emissivity of copper and nickel in the mid-infrared range between 250 and 900 $^{\circ}$C

Prediction of the normal spectral emissivity of metals with different surface roughness using a modified ray-tracing method

Broadband Optical Absorption Based On Single-Sized Metal-Dielectric-Metal Plasmonic Nanostructures With High-Epsilon '' Metals

Kinetic theory of the non-local electrodynamic response in anisotropic metals: skin effect in 2D systems

Thermal conductivity and Lorenz ratio of metals at intermediate temperatures with mode-level first-principles analysis

Resonantly suppressed transmission and anomalously enhanced light absorption in ultrathin metal films

Permittivity Acquisition Of Plasmonic Materials At Epsilon Near Zero Wavelengths

Consistency between reflection M-EELS and optical spectroscopy measurements of the long-wavelength density response of Bi$_2$Sr$_2$CaCu$_2$O$_{8+x}$

Effect of optical properties on the thermal responses of copper films induced by ultrafast lasers

Ellipsometric study of the medium-related dielectric functions of noble metals

IR radiometer sensitivity and accuracy improvement by eliminating spurious radiation for emissivity measurements on highly specular samples in the 2 to 25 μm spectral range

The Medium-Related Optical Constants of Noble Metals Observed by Ellipsometric Study

Local Features of the Fermi Surface Curvature and the Anomalous Skin Effect in Metals

SP Resonance Angle and Q-factor of Metals in Ultraviolet Band

Modeling the effects of surface roughness on the emissivity of aluminum alloys

A New Method to Analyse the Role of Surface Plasmon Polaritons on Dielectric-Metal Interfaces

Specular Inverse Faraday Effect in Transition Metals

Analyses of Spectral Emissivity in Radiation Temperature Measurement