Improved body-centered cubic unit for accurately predicting the melting characteristics of metal foam composite phase change material
Hongyang Li,Chengzhi Hu,Yanhui Jiang,Yichuan He,Dawei Tang
DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2022.123635
IF: 5.2
2022-11-14
International Journal of Heat and Mass Transfer
Abstract:Metal foams have been widely used to enhance the heat storage performance of phase change materials (PCMs). For numerically simulating the metal foam composite PCMs, a body-centered cubic (BCC) unit has been proposed to represent the real foam structure. However, the original popular BCC unit is closed when its porosity is lower than 0.9395, which is very different from the actual metal foam. Besides, the effective thermal conductivity (ETC) of its paraffin composite is a key parameter that directly affects the melting performance. It is not always accurately predicted compared with the existing investigations. In the present work, various modified BCC units were built by regulating the structure of the original one to approach the open-cell structure of the real foam, and their melting performances characterized by the ETC were compared with the existing literature results. Through analyzing the structural parameter (γ, diameter ratio of the inscribed and corner spheres) and ETC, we found that when the porosity of the BCC unit is lower than 0.9395, improving the γ is helpful in gaining the open-cell structure to represent the actual metal foam. When the porosity is 0.876, γ ≥ 1.11474 means an open-cell structure, and the BCC unit with γ ≥ 1.062 is open-cell for the porosity of 0.909. Besides, when the porosity is larger than 0.9395, one can gradually approach the experimental ETC by improving γ. In a word, this study extends the accurate application of the original BCC unit in acting as metal foam.
engineering, mechanical,thermodynamics,mechanics