Abstract:In this study, we report the effect of cerium (Ce) addition on the tension-compression yield and cyclic asymmetry in commercially pure magnesium (Cp-Mg) and Mg-Al alloy at room temperature (RT). The investigated materials Cp-Mg, Mg-0.5Ce, and Mg-3Al-0.5Ce were extruded at 400°C, followed by annealing at the same temperature for one hour. Incorporating 0.5wt.% Ce in pure Mg results in the weakening of its basal texture, uniform distribution of Mg12Ce precipitates, and grain size refinement. Consequently, the tensile yield strength and ductility of pure Mg increased, and tension-compression yield asymmetry was eliminated. However, the presence of 3wt.% Al in Mg suppresses the beneficial effects of Ce addition. The formation of complex precipitates, such as Mg-Al-Ce and Al11Ce3, limits the weakening of the basal texture, reduction in grain size, improvement in ductility, and elimination of tension-compression yield asymmetry observed in Mg-0.5Ce. Nevertheless, Al contributes to the solid solution strengthening in Mg and possibly lowers the critical stress required for twinning in Mg, resulting in the highest tensile strength of Mg-3Al-0.5Ce. Finally, the addition of 0.5wt.% Ce enhances the cyclic strength, stabilizes cyclic stress response, reduces inelastic strain, and minimizes cyclic asymmetry in both pure Mg and Mg-Al alloy while maintaining a comparable fatigue life. Overall, Ce addition positively impacts the microstructure and mechanical behavior of pure Mg and its investigated alloy. The reasons for these improvements are discussed in detail.

Effects of Cerium on Texture and Mechanical Property of 2090 Aluminium-Lithium Alloys

Effect of Cerium on Microstructure, Texture and Properties of Ultrahigh-Purity Copper

Effect of cerium alloying on microstructure, texture and mechanical properties of magnesium during cold-rolling process

Effect of Ce Content on the Microstructure and Mechanical Properties of Al-Cu-Li Alloy

Effect of Cerium on Microstructures and Mechanical Properties of Az61 Wrought Magnesium Alloy

Investigation of the behaviour of rare earth element cerium in aluminium–lithium alloys by the method of internal friction

Effect of Ce Content on the Microstructure and Mechanical Properties of Squeeze-Cast Al–5Mg-2.2Si-0.6Mn Alloys

Effect of minor cerium additions on microstructure and mechanical properties of cast Al – Cu – Mg – Ag alloy

Effect of rare-earth Ce on the texture of non-oriented silicon steels

Effect of Ce Microalloying on Microstructure and Mechanical Properties of Extruded Mg–10Gd–0.5Zr Alloy

Investigation on Behavior of Rare Earth Element Cerium in Aluminum-Lithium Alloys by Internal Friction Method

Effect of Ce Addition on the Microstructure, Thermal Conductivity and Mechanical Properties of Mg–0.5Mn Alloys

Effect of Ce Content on the Microstructure of Semisolid Mg-10Al Alloy

Effect of the addition of cerium on the microstructure evolution and thermal expansion properties of cast Al-Cu-Fe alloy

Effect of Ce and solidification cooling rate on the microstructure and mechanical properties of AA2017 aluminum alloy

A comparative study on the effect of 0.5 wt% Ca or Ce on the microstructure, texture, and mechanical properties of the hot-rolled Mg-4Li alloy

Influence of Ce on microstructure and mechanical properties of LA141 alloys

Texture Modification During Extrusion of Some Mg Alloys

Influence of At%Ce on the electronic structure and mechanical properties of Al-Ce compounds from first-principles calculations

Towards reducing tension-compression yield and cyclic asymmetry in pure magnesium and magnesium-aluminum alloy with cerium addition

Microstructure and Mechanical Properties of Ti44Al6Nb Alloys with Different Cerium Contents