Abstract:A differential, membrane-based nanocalorimeter for general specific heat studies of very small samples, ranging from 0.5 mg to sub-{\mu}g in mass, is described. The calorimeter operates over the temperature range from above room temperature down to 0.5 K. It consists of a pair of cells, each of which is a stack of heaters and thermometer in the center of a silicon nitride membrane, in total giving a background heat capacity less than 100 nJ/K at 300 K, decreasing to 10 pJ/K at 1K. The device has several distinctive features: i) The resistive thermometer, made of a Ge_{1-x}Au_{x} alloy, displays a high dimensionless sensitivity |dlnR/dlnT | \geq 1 over the entire temperature range. ii) The sample is placed in direct contact with the thermometer, which is allowed to self-heat. The thermometer can thus be operated at high dc current to increase the resolution. iii) Data are acquired with a set of eight synchronized lock-in amplifiers measuring dc, 1st and 2nd harmonic signals of heaters and thermometer. This gives high resolution and allows continuous output adjustments without additional noise. iv) Absolute accuracy is achieved via a variable-frequency-fixed-phase technique in which the measurement frequency is automatically adjusted during the measurements to account for the temperature variation of the sample heat capacity and the device thermal conductance. The performance of the calorimeter is illustrated by studying the heat capacity of a small Au sample and the specific heat of a 2.6 {\mu}g piece of superconducting Pb in various magnetic fields.

Chemical Calibration for Cooling Constants of Conduction Calorimeter

Development of an Automatic Calibration Device for High-Accuracy Low Temperature Thermometers

Construction Of A Rotating-Bomb Combustion Calorimeter And Measurement Of Thermal Effects

In-situ calibration method for thermocouples in accelerating rate calorimeter based on multiple fixed-points and Joule heat

Combined measurement and calibration method for the thermal conductivity of phase change materials

Power oscillation calibration and its application in power compensation reaction calorimetry

Measurement of liquid′s specific heat capacity using changeable volume calorimeter

Application of Reaction Calorimetry in the Thermal Hazard Analysis of Chemical Process

THE CONSTRUCTING OF THE HIGH PERFORMANCE ADIABATIC CALORIMETER

Modulated-bath AC calorimetry using modified commercial Peltier-elements

Predictive temperature control design for reaction calorimeter based on mechanism parameter model

Adsorptive microcalorimeter and its volume calibration

A small sample-size automated adiabatic calorimeter from 70 to 580 K

Temperature and enthalpy of fusion calibration of Calvet calorimeter from -150°C to 156°C

A New Approach for Measurement of the Low-Temperature Specific Heat Capacity

Metal-carbon eutectic high temperature fixed points for in-situ calibration of radiation thermometers

Heat Dissipation Analysis and Correction of the Sample in Accelerating Rate Calorimetric Experiment

A high-precision method to measure thermal conductivity of solids using reversible heat flux

Numerical Simulation of the Thermal Inertia of an Adiabatic Reaction Calorimeter in Reaction Thermal Safety Process

Verifying the Symmetry of Ultra-Fast Scanning Calorimeters Using Liquid Crystal Secondary Temperature Standards

Membrane-based nanocalorimeter for high-resolution measurements of low-temperature specific heat