Abstract:The HPLC and LC-MS, GC-MS and other analytical methods were used to qualitatively and quantitatively analyze the intermediates and final products of Ni/W2C catalyzed glucose hydrotreating under different process conditions. Ni-W2C was recently reported as a promising catalyst for the hydrogenolysis of cellulose or glucose to EG with the highest yield of 75%, yet this was achieved at the substrate concentration less than 1% because the concentrated substrate will lead to coking. This meant low productivity and high cost for commercial production, thus hinder this promising process from industry application. Therefore, insights into the reaction network to elucidate the coking mechanism and to optimize the process are needed. In this work, the mechanistic study on the glucose conversion, especially with the concentrated glucose substrate, over 2%Ni-30%W2C/AC was systematically carried out. The reaction parameters including temperature, initial glucose concentration and H2 pressure have been investigated and the results, in combination with the intermediate analysis by LC, LCMS and GCMS, showed that three parallel reaction pathways including retro-aldol reaction, isomerization and hydrogenation were involved in the reaction. C2 product (EG) was originated from glucose hydrogenolysis while the C3 products (1,2-PG and glycerol) were originated from fructose hydrogenolysis, and the dehydration of fructose led to 5-HMF and finally to coke in concentrated glucose conversion. Based on these understanding, the ratio of C3 products to C2, on the one hand, has been manipulated by tuning of isomerization of glucose into fructose with base additive and on the other hand, coking has been avoided by accelerating its competing reactions even at the glucose concentration of 10%(mass). More interestingly, it was indicated that glucose of low concentration favors retro-aldol reaction while the one of high concentration tends to hydrogenate.

Preparation of ultrafine amorphous NiWB alloys and their activities hi glucose hydrogenation to Sorbitol

Catalytic Hydrogenolysis of Glucose into Low Carbon Glycols over Modified NiB Amorphous Alloy Catalysts

Glucose Hydrogenation to Sorbitol over a Skeletal Ni-P Amorphous Alloy Catalyst (raney Ni-P)

Excellent Activity of Ultrafine Co-B Amorphous Alloy Catalyst in Glucose Hydrogenation

Unveiling the nature of glucose hydrogenation over Raney Ni: DFT and AIMD simulations

Glucose Hydrogenation over Ni–B/SiO2 Amorphous Alloy Catalyst and the Promoting Effect of Metal Dopants

Efficient Catalytic Hydrogenation of Glucose to Sorbitol over Metallic Nickel-Rich Nickel Borides under Mild Reaction Conditions

Preparation of Ni-B amorphous alloy catalyst from nickel hydrazine complex with ultrasonic assistance

Effects of nickel ethylenediamine complex on the preparation of Ni-B amorphous alloy catalyst with ultrasonic assistance

Preparation of High Activity Ni-B Amorphous Alloy Catalysts by Chemical Reduction Nickel Ethylenediamine Complex under Ultrasonic

Ultrafine Ni–Co–W–B amorphous alloys and their activities in benzene hydrogenation to cyclohexane

Glucose hydrogenation on Co-B amorphous alloy catalysts and the promoting effect of metal additives

Preparation of highly active and hydrothermally stable nickel catalysts.

In Situ Growth of Tungsten Oxide on Alumina to Boost the Catalytic Performance of Platinum for Glycerol Hydrogenolysis

A High-Resolution MAS NMR Study of the Structure of Fluorinated NiW/γ-Al<sub>2</sub>O<sub>3</sub>Hydrotreating Catalysts

Preparation of the Ni-B Amorphous Alloys with Variable Boron Content and Its Correlation to the Hydrogenation Activity

Effective Conversion of Cellobiose and Glucose to Sorbitol Using Non-Noble Bimetallic NiCo/HZSM-5 Catalyst

A High-Resolution MAS NMR Study of the Structure of Fluorinated NiW/γ-Al2O3 Hydrotreating Catalysts

A Novel Ni-Wc/Ac Catalyst with Enhanced Electroactivity for Glucose Oxidation

Mechanistic study on catalytic conversion of glucose into low carbon glycols over nickel promoted tungsten carbide catalyst

XPS Studies on a Novel Amorphous Ni–Co–W–B Alloy Powder