Abstract:In order to further improve the hydrogenation performance of the existing hydrotreating (HDT) catalysts and explore the structure-activity relationship of the catalysts, a series of Ni modified Y zeolites were successfully synthesized by in-situ synthesis method, and the corresponding NiMo catalysts supported on Ni modified Y zeolites and γ-Al2O3 were prepared for diesel fuel hydrotreating. The effect of Ni modification on the properties of the synthesized xNiY zeolites and the corresponding NiMo/AxNiY catalysts were determined by the characterization techniques such as XRD, ICP-AES, N2 physical adsorption-desorption, SEM, UV-Vis DRS, Py-FTIR, HRTEM and XPS. The results show the in-situ modification method can achieve a favorable composite effect of Ni species and the Y zeolites and Ni modification can affect the physical-chemical properties of the synthesized Y zeolites and the NiMo/AxNiY catalysts in varying degrees. Although Ni modification led to a slight decrease in the specific surface areas and pore volumes of the Y zeolites, it can promote the particle uniformity and improve the number of acid sites of the Y zeolites, which are beneficial to the adsorption of sulfide molecules. Moreover, the incorporation of Ni into Y zeolites can also effectively improve the number of acid sites of the prepared NiMo/AxNiY catalysts and improve the stacking number of MoS2 slabs, and enhance the Mo species dispersion, which promote the adsorption and hydrogenation performances of the reactants on the catalysts. Hence, the catalysts containing Ni modified Y zeolites exhibited higher hydrotreating activity compared with the catalyst containing unmodified Y zeolites. Among the four investigated catalysts, the NiMo/A3NiY was found to be the most favorable for the purpose of preparing highly active hydrotreating catalysts for diesel fuels.

A new generation hydrotreating catalyst RN-10

A NEW GENERATION CATALYST RN 10 FOR DISTILLATE HYDROTREATING

Deactivation and Regeneration of Raney-Ni Catalyst During Multiphase Dehydrogenation of Cyclohexane

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Development and Commercial Application of High Efficiency Catalysts for Resid Hydrotreating

Development of New Generation Catalysts for Selective Hydrodesulfurization of Fcc Naphtha

Development and commercial application of catalysts for resid hydrotreating technology (RHT)

REVAMPING OF HYDROTREATING UNIT AND COMMERCIAL APPLICATION OF RN-32V GAS OIL HYDROTREATING CATALYST

Development and progress of hydrogenation catalyst series

Engineering Dual Bed Hydrocracking Catalyst Towards Enhanced High-Octane Gasoline Generation from Light Cycle Oil

DEVELOPMENT AND COMMERCIAL APPLICATION OF KEY TECHNOLOGY FOR EFFICIENT CONVERSION OF HEAVY OIL

SSHT Process-a Low Cost Solution for Low Sulfur and Low Aromatics Diesel

Study on High-Performance Unsupported Ni–Mo–W Hydrotreating Catalyst

PROGRESS OF HYDROCRACKING TECHNOLOGY IN RIPP

Process Optimization of RTS Technology for Ultra-Low Sulfur Diesel

INDUSTRIAL APPLICATION OF NAPHTHA PRE-HYDROFINING CATALYST LY-2010

DEVELOPMENT OF MID-PRESSURE HYDROCRACKING FOR MORE MIDDLE DISTILLATES

Hydrotreating of diesel fuel over in-situ nickel modified Y zeolite supported Ni-Mo-S catalyst

Experimental Determination on the Deactivation Kinetics of Residue Hydroprocessing in a Two-Stage Fixed Bed Loaded with HDM and HDS Catalysts

Low-Temperature Hydrotreatment of C4/C5 Fractions Using a Dual-Metal-Loaded Composite Oxide Catalyst

Supported NiW Catalysts with Tunable Size and Morphology of Active Phases for Highly Selective Hydrodesulfurization of Fluid Catalytic Cracking Naphtha