Abstract:In a refinery accurately extracting data of heat exchanger network has intimate influence on the scheme of heat integration and the performance of optimal operation.For data reconciliation of nonlinear state parameters of a heat exchanger,a lumped parameter heat transfer model,which featured partitioning the heat exchanger with piecewise linear sub-models,was proposed to overcome the difficulty of nonlinear state space equations induced by nonlinear change of stream properties in the heat exchanger.A set of state space equations on the basis of piecewise linear Kalman filtering was established.A method of data reconciliation for nonlinear state parameters of heat exchangers was proposed.The procedure of the proposed approach and its behavior were exemplified by data reconciliation for a high pressure heat exchanger in a wax oil hydrotreating unit.The results showed that the convergence of the proposed model was strongly dependent upon the number of partitioning segments for a heat exchanger.The state parameters of heat exchanger tended to be convergent to a constant as the number of partitioning segments increased.And the number of partitioning segments should be determined by trial-and-error according to requirements of computational precision in practice.When the inlet temperature of heat exchanger was measured, the outlet temperature could be rectified using the proposed method.And data reconciliation on the inlet and outlet temperatures of the heat exchanger could be performed iteratively.The proposed method could be effectively used for data reconciliation of nonlinear state parameters of heat exchangers.The proposed approach had higher accuracy for data reconciliation of a larger difference between inlet and outlet temperatures or dramatic changes of physical properties of streams in heat exchangers.

State and parameter estimation of exothermic batch reactor

State Estimation for Batch Distillation Operations with a Novel Extended Kalman Filter Approach

Estimation of Time-Dependent Parameters of a Heat-Integrated Distillation Column System

NON-EQUILIBRIUM MODEL BASED LARGE-SCALE PARAMETER ESTIMATION FOR THREE-PHASE DISTILLATION IN PACKED COLUMNS

Parameter Estimator Design with Application to a Chemical Reactor

Kalman Filter Based Model Predictive Control for Batch Reactor

Measuring enthalpy of fast exothermal reaction with micro-reactor-based capillary calorimeter

Data Reconciliation for Nonlinear State Parameters of Heat Exchangers Using Kalman Filtering

Simultaneous Estimation of Kinetic and Heat Transfer Parameters of a Wall-Cooled Fixed-Bed Reactor

Predictive temperature control design for reaction calorimeter based on mechanism parameter model

Thermal and Kinetic Research on a Highly Exothermic Condensation Reaction by Powerful Calorimeters

Monitoring batch suspension polymerization process based on calorimetric-state estimation technique

Thermal runaway critical parameters and thermal safety in batch exothermic reaction

Online Temperature Estimation of Shell Coal Gasification Process Based on Extended Kalman Filter

Reaction Calorimetry in Continuous Flow Mode: A New Approach for the Thermal Characterization of High Energetic and Fast Reactions

Thermal evolution monitoring of a chemical reactor wall based on inverse analysis

Investigation on Thermal Runaway in Batch Reactors by Parametric Sensitivity Analysis

Power oscillation calibration and its application in power compensation reaction calorimetry

Model-Free Kinetic Determination Of Pre-Exponential Factor And Reaction Mechanism In Accelerating Rate Calorimetry

Optimal sensor location for state estimation of nonlinear distributed parameter systems

Numerical Investigation of Distribution of Reaction Rate During Convective Heat Transfer with Endothermic Chemical Reaction