Abstract:This study investigated the regeneration of phenol saturated activated carbon fiber (ACF) with a novel electro-peroxydisulfate (E-PDS) process. Compared with traditional electrochemical regeneration, E-PDS process could simultaneously regenerate the exhausted ACF and mineralize desorbed contaminants by activating PDS in water with a much lower energy consumption (1/6). According to the estimation of relative contributions involved in E-PDS process, reactive oxygen species (ROS), especially sulfate radical (SO4•−), played a dominant role in the degradation of phenol and its byproducts. It was worth noting that the accumulation of byproducts in solution increased significantly after SO4•− concentration decreased in aqueous solution. Further study proved that the regeneration efficiency of ACF could be improved by the application of multiple doses of PDS for the effective reduction of byproduct accumulation. However, application of multiple doses of PDS could not prevent ACF from being oxidized by ROS generated in the system, subsequently leading to loss of ACF adsorption capacity. This limitation is a significant concern in treatment technologies based on carbon materials activated by peroxides and such technologies should be studied further to obtain additional insights on their potential and applicability in industrial practice. Nevertheless, the adsorption capacity of ACF remained above 40% after three regeneration cycles in the E-PDS process. Therefore, E-PDS process showed promise for further evaluation as a potentially viable approach for the regeneration of carbons saturated with organic pollutants.

Regeneration of activated carbon by electrochemical method

Regeneration of Phenol‐saturated Activated Carbon in an Electrochemical Reactor

The Study of Active Carbon Regeneration by Electrolysis Oxidation

In Situ Regeneration of Phenol-Saturated Activated Carbon Fiber by an Electro-peroxymonosulfate Process.

Electrochemical regeneration of phenol-saturated activated carbon – proposal of a reactor

Regeneration of activated carbon adsorbed EDTA by electrochemical method

Electrochemical regeneration of activated carbon loaded with p-nitrophenol in a fluidized electrochemical reactor

Study on Microwave Irradiation for Regenerating Activated Carbon Carrying Phenol

Study on microwave regeneration of phenol exhausted activated carbon

Determination of the optimum conditions for electrochemical regeneration of exhausted activated carbon

Preparation of Activated Carbon from Carbonized Coconut Shell by K2 CO3 Chemical Activation

Electro-peroxone regeneration of phenol-saturated activated carbon fiber: The effects of irreversible adsorption and operational parameters

Electrochemical Regeneration of Activated Carbon Cloth Exhausted with Bentazone

Discussion on Activated Carbon Regeneration Method

Electrochemical regeneration of carbon-based adsorbents: a review of regeneration mechanisms, reactors, and future prospects

Preparation and Electrochemical Properties of PF-based Activated Carbon

Impact of the saturation level on the electrochemical regeneration of activated carbon in a single sequential reactor

Activated Carbon Electrodes: Electrochemical Oxidation Coupled with Desalination for Wastewater Treatment.

Simultaneous Regeneration of Cathodic Activated Carbon Fiber and Mineralization of Desorbed Contaminations by Electro-Peroxydisulfate Process: Advantages and Limitations.

Microwave-assisted Solvent Regeneration of Activated Carbon

Ultrasonic regeneration of activated carbon in water plants and correlation of adsorption performance