Abstract:In this study, a new method that encompasses electricity, permonosulfate (PMS), and ozone (E-PMS-O3) was proposed and applied in the regeneration of phenol-saturated activated carbon fiber (ACF). Compared with traditional regeneration technology, the E-PMS-O3 process simultaneously regenerated exhausted ACF in situ and mineralized the desorbed pollutants effectively (78.67%) with relatively low energy consumption (4.338 kWh m−3). Furthermore, the E-PMS-O3 regeneration process only required 2 h, which was shorter than other well-documented electro-advanced oxidation processes (EAOPs), such as the E-O3 process lasting for 3 h, the E-persulfate process for 6 h, and the E-Fenton process for 6 h. Possible pathways in the regeneration process include direct electron transfer, ozone oxidation, PMS oxidation, non-radical reactions, and reactive oxygen species (ROS) oxidations. Two main ROS — hydroxyl radical ( O • H ) and sulfate radical ( SO 4 • − ) were probed and their contribution ratio was approximately 1:1. An external electric field visibly enhanced the recovery adsorption capacity of ACF and accelerated the decomposition of PMS. Interestingly, additional experiments revealed that adding two different oxidants (PMS/O3) provided a better protection effect on the properties of ACF against oxidation of oxidants and ROS. It's important to mention that the maximum concentration of byproducts remained below 5 mg g−1, which effectively minimized the potential for subsequent pollution. In the end, multiple regeneration cycles demonstrated that the regeneration efficiency was nearly 60% even after 6 cycles. Hence, the E-PMS-O3 process was promising for further exploration and discussion when applied in regeneration of exhausted AC materials.

Electro-peroxone regeneration of phenol-saturated activated carbon fiber: The effects of irreversible adsorption and operational parameters

Rapid in situ regeneration of phenol-saturated activated carbon fiber by an electro-permonosulfate-ozone process: Performance, operators and mechanism

Simultaneous Regeneration of P-Nitrophenol-saturated Activated Carbon Fiber and Mineralization of Desorbed Pollutants by Electro-Peroxone Process

Simultaneous Regeneration of Cathodic Activated Carbon Fiber and Mineralization of Desorbed Contaminations by Electro-Peroxydisulfate Process: Advantages and Limitations.

In Situ Regeneration of Phenol-Saturated Activated Carbon Fiber by an Electro-peroxymonosulfate Process.

Evaluation of the Stability of Polyacrylonitrile-Based Carbon Fiber Electrode for Hydrogen Peroxide Production and Phenol Mineralization During Electro-Peroxone Process

Impact of the saturation level on the electrochemical regeneration of activated carbon in a single sequential reactor

Regeneration of Phenol‐saturated Activated Carbon in an Electrochemical Reactor

Persulfate/electrochemical/FeCl2 System for the Degradation of Phenol Adsorbed on Granular Activated Carbon and Adsorbent Regeneration

Regeneration of Rhodamine B Saturated Activated Carbon by an Electro-Peroxone Process

Electric Field Induced Activated Carbon Fiber (ACF) Cathode Transition from an Initiator/a Promoter into an Electrocatalyst in Ozonation Process

Electrochemical regeneration of phenol-saturated activated carbon – proposal of a reactor

Phenol Degradation in an Electrochemical System with TiO2/activated Carbon Fiber As Electrode

Electrochemical regeneration of activated carbon loaded with p-nitrophenol in a fluidized electrochemical reactor

Integrated electrochemically enhanced adsorption with electrochemical regeneration for removal of acid orange 7 using activated carbon fibers

SORPTION OF PHENOL ON ACTIVATED CARBON FIBERS IN A FIXED BED AND REGENERATION

Electrochemical Activation of Peracetic Acid with Activated Carbon Fiber Cathode for Sulfamethoxazole Elimination: Long-Lasting Catalytic Performance and Mechanism

Ozonation of P-Nitrophenol Adsorbed on Activated Carbon Fiber (acf) and the Change of Textural and Chemical Characteristics of Acf

Cathodic polarization effect on the electro-Fenton regeneration of activated carbon

Regeneration of dye-saturated activated carbon through advanced oxidative processes: A review

The Study of Active Carbon Regeneration by Electrolysis Oxidation