Abstract:Azo dyes are the most widely used synthetic dyes in the printing and dyeing process. However, the discharge of untreated azo dyes poses a potential threat to aqueous ecosystems and human health. Herein, we fabricated a novel heterogeneous catalyst: activated-carbon-fiber-supported ferric alginate (FeAlg-ACF). Together with peroxymonosulfate (PMS) and visible light, this photocatalytic oxidation system was used to remove an azo dye—azophloxine. The results indicated that the proposed catalytic oxidation system can remove 100% of azophloxine within 24 min, while under the same system, the removal rates were only 92% and 84% when ferric alginate was replaced with ferric citrate and ferric oxalate, respectively, which showed the superiority of FeAlg-ACF. The degradation of azophloxine is achieved by the active radicals (SO4•− and •OH) released from PMS and persistent free radicals from activated carbon fiber. Moreover, due to ferric alginate’s highly intrinsic photosensitivity, visible radiation can further enhance the ligand-to-metal charge transfer (LMCT) processes. After 24 min of treatment, the total organic carbon of the azophloxine solution (50 μmol/L) decreased from 1.82 mg/L to 79.3 μg/L and the concentration of nitrate ions increased from 0.3 mg/L to 8.6 mg/L. That is, up to 93.5% of azophloxine molecules were completely degraded into inorganic compounds. Consequently, potential secondary contamination by intermediate organic products during catalytic degradation was prohibited. The azophloxine removal ratio was kept almost constant after seven cycles, indicating the recyclability and longevity of this system. Furthermore, the azophloxine removal was still promising at high concentrations of Cl−, HCO3−, and CO32−. Therefore, our proposed system is potentially effective at removing dye pollutants from seawater. It provides a feasible method for the development of efficient and environmentally friendly PMS activation technology combined with FeAlg-ACF, which has significant academic and application value.

Removal of characteristic pollutants from printing and dyeing wastewater by adsorption-catalytic ozonation

REMOVAL OF PARTICULAR POLLUTANTS IN PAPERMAKING WASTEWATER BY ADSORPTION-CATALYTIC OZONATION

Combination of catalytic ozonation by regenerated granular activated carbon (rGAC) and biological activated carbon in the advanced treatment of textile wastewater for reclamation.

Study on Advanced Treatment of Dyeing Wastewater by Fenton Oxidation

Preparation of Mn/Mg/Ce Ternary Ozone Catalyst and Its Mechanism for the Degradation of Printing and Dyeing Wastewater

Rapid Removal of Azophloxine Via Catalytic Degradation by A Novel Heterogeneous Catalyst under Visible Light

Catalytic ozonation of organic pollutants from bio-treated dyeing and finishing wastewater using recycled waste iron shavings as a catalyst: Removal and pathways

Experimental Study on Treatment of Dyeing Wastewater by Activated Carbon Adsorption, Coagulation and Fenton Oxidation

Treatment of printing and dyeing biochemical water by activated carbon cooperated with Fenton reagent

Wet Air Oxidation of Printing and Dying Wastewater

Efficient treatment of salty organic wastewater by α‐MnO2‐N/C synergistic catalytic ozonation: Effect and mechanism

Experimental study on the treatment process of wastewater in a printing and dyeing industrial park

Efficient Degradation of Printing and Dyeing Wastewater by Lotus Leaf-Based Nitrogen Self-Doped Mesoporous Biochar Activated Persulfate: Synergistic Mechanism of Adsorption and Catalysis

Advanced Treatment Of Bio-Treated Dyeing And Finishing Wastewater Using Ozone-Biological Activated Carbon: A Study On The Synergistic Effects

Catalytic ozonation of textile wastewater as a polishing step after industrial scale electrocoagulation

Advanced Treatment of Bio-treated Dyeing Wastewater by Ozone Oxidation Process

Minimizing Freshwater Consumption in the Wash-Off Step in Textile Reactive Dyeing by Catalytic Ozonation with Carbon Aerogel Hosted Bimetallic Catalyst

Insight into the application of micro-nano bubbles combined with heat-activated persulfate oxidation for removing dissolved organic matter from printing and dying wastewater

Pilot-scale study on catalytic ozonation of bio-treated dyeing and finishing wastewater using recycled waste iron shavings as a catalyst

Decoloration of dye wastewater using sludge carbon supported iron catalytic persulfate and ozone oxidation

Catalytic Ozonation of Reactive Red 195 in Aqueous Solution over a Cobalt/Aluminum Oxide-Ceria Catalyst