Abstract:Carbon nanotube/continuous carbon fiber reinforced poly(ethylene terephthalate) (CNT/CCF/PET) composites are prepared by melt impregnating. The effects of CF and CNT content on the mechanical properties, melt and crystallization behaviors, and submicroscopic morphology of CNT/CCF/PET composites are studied. The tensile test results show that the increase of CF and the addition of appropriate amount of CNT improved the tensile strength and tensile modulus of the composites. When the content of CNT is 1.0 wt% and the content of CF is 56 wt%, the properties of the composites are the best, with tensile strength of 1728.7 MPa and tensile modulus of 25.1 GPa, which is much higher than that of traditional resin matrix composites. The results of dynamic mechanical analysis (DMA) show that the storage modulus of the composites increased with the increase of CF and CNT content. In particular, the addition of CNT greatly reduced the loss modulus of the composites. Morphological analysis show that the addition of CNT improved the fiber–matrix interface of the composite, which changes from fiber pull-out and fracture failure to fiber matrix fracture failure, and the fiber matrix interface is firmly bonded. In addition, there are polymer coated CNT protrusions on the surface of the fiber was observed. The results of differential scanning calorimetry (DSC) show that the melting temperature and crystallization temperature of the composites increased with the increase of CF content. The addition of CNT had little effect on the melting temperature of the composites, but it further improved the crystallization temperature of the composites. The effect of CNT content on the crystallization kinetics of the composites is studied. The non-isothermal crystallization kinetics of the composites is described by Jeziorny's improved Avrami equation. The results show that CNT has a great influence on the crystallization type of the composites. As a nucleating agent, CNT has obvious heterogeneous nucleation effect in the composites, which improves the crystallization rate of PET.

Preparation, Mechanical Properties And Morphology Of The Composites Of Poly(Ether Sulfone) Reinforced With Potassium Titanate Whisker.

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Studies of the Toughness and Reinforcement of PP/Magnesium Hydrate Whisker/POE Composites

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Preparation of Magnesium Hydroxide Sulfate Whisker-Phenolic Resin Composite by In-Situ Polymerization Technique and Its Properties

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

STUDY ON FRICTION AND WEAR PROPERTIES OF POTASSIUM TITANATE WHISKERS-REINFORCED PTFE COMPOSITES

Effects of potassium titanate whisker and glass fiber on tribological and mechanical properties of PTFE/PEEK blend

Preparation of Calcium Sulfate Hemihydrate and Application in Polypropylene Composites

Dynamic mechanical properties of whisker/PA66 composites at high strain rates

Study of the Tribological Properties of Modified Potassium Titanate Whisker Reinforced Resin-based Friction Composites

Tensile and Transformational Behavior of Poly(Ether Sulfone) Polycarbonate Blends

Study on the epoxy bonding properties of polyphenylene sulfide matrix composites reinforced by montmorillonite and basalt fiber

Simultaneously Improving The Toughness, Flexural Modulus And Thermal Performance Of Isotactic Polypropylene By Alpha-Beta Crystalline Transition And Inorganic Whisker Reinforcement

Poly(ethylene Terephthalate)/carbon Black Composite Fibers Prepared by Electrospinning

Influence of magnesium and calcium sulfate whisker on crystallization characteristics of poly (butylene adipate-co-terephthalate) and Poly(butylene succinate)

Research on properties of composite based on polyether sulfone/cyanate ester semi‐interpenetrating resin system

Kinetic and thermodynamics analysis of water absorption in unidirectional fiber reinforced composites by polyethersulphone and polyphenylence sulfide

Wetting dynamics and adhesion of polyether ether ketone

Mechanical Properties, Melting and Crystallization Behaviors, and Morphology of Carbon Nanotubes/Continuous Carbon Fiber Reinforced Polyethylene Terephthalate Composites

Evaluation of the Mechanical Properties of Polyether Sulfone-Toughened Epoxy Resin for Carbon Fiber Composites