Abstract:Use of aluminized composite solid propellants and submerged nozzles are common in solid rocket motors (SRM). Due to the generation of slag, which injects into a combusted gas flow, a two-phase flow pattern is one of the main flow characteristics that need to be investigated in SRM. Validation oftwo-phase flow modeling in a solid rocket motor combustion chamber is the focus of this research. The particles' boundary conditions constrain their trajectories, which affect both the two-phase flow calculations, and the evaluation of the slag accumulation. A harsh operation environment in the SRM with high temperatures and high pressure makes the measurement of the internal flow field quite difficult. The open literature includes only a few sets of experimental data that can be used to validate theoretical analyses and numerical calculations for the two-phase flow in a SRM. Therefore, mathematical models that calculate the trajectories of particles may reach different conclusions mainly because of the boundary conditions. A new method to determine the particle velocities on the solid propellant surface is developed in this study, which is based on the x-ray real-time radiography (RTR) technique, and is coupled with the two-phase flow numerical simulation. Other methods imitate the particle ejection from the propellant surface. The RTR high-speed motion analyzer measures the trajectory of the metal particles in a combustion chamber. An image processing software was developed for tracing a slug particle path with the RTR images in the combustion chamber, by which the trajectories of particles were successfully obtained.

DETERMINATION OF INJECTION BOUNDRY CONDITION OF PARTICLES IN SRM CHAMBER BASED ON RTR TECHNIQUES

Particle tracking in combustion chamber of solid rocket motor

Particle Velocity on Solid-Propellant Surface Using X-Ray Real-Time Radiography

Experimental study of particle trajectories in solid rocket motor chamber

New Method to Determine the Velocities of Particles on a Solid Propellant Surface in a Solid Rocket Motor

Experimental study of particles trajectory in firing solid rocket motor with RTR technique part: (I) analysis of feasibility and experimental results

EXPERIMENTAL STUDY ON DISTRIBUTION PATTERN OF PARTICLES IN SRM NOZZLE

IMPROVEMENT OF MEASUREMENT ACCURACY OF RTR SYSTEM

Experimental study of particles trajectory in firing solid rocket motor with RTR technique (2). The application of image processing technique

Research on the Safety of Long Term Storage Solid Rocket Motor with Debonded Layer

Collection and Measurement Condensed Particle under Aggregation Condition

Numerical simulation on 3-D two-phase flow field in SRM with acceleration load

Combustion Characteristic Analysis on Condensed-Phase Particle in SRM Chamber

Experimental and numerical simulation of particle collision and coalescence in a converging tube

EDGE DETECTION TECHNIQUE FOR EXPERIMENTAL DIAGNOSIS IN ROCKET MOTOR

Study of Experimental Method for Ablation of Insulator of SRM with High Acceleration (Ⅰ)

Numerical Simulation of Particle Collision and Impingement for a Model SRM

Experimental Investigation on the Condensed Particles Size Distribution at SRM Nozzle Throat

Experiment on Granularity Peculiarity of Condensed Particles in the Chamber of SRM under Aggregation Condition

Internal Ballistic Calculation and Test Study on Spinning Solid Rocket Motor

A Feasible Method for the Trajectory Measurement of Radial Jet Drilling Laterals