Abstract:The extremely harsh environment and highly unsteady and transient nature during supersonic combustion bring great challenges for quantitative diagnostics. In the present work, for the first time, we report measurements of two-dimensional distributions of flame temperatures in a Rocket-Based Combined Cycle (RBCC) combustion chamber using a multispectral imaging technique with both spatial and spectral resolutions. The relation between the multispectral radiation intensity images and the flame 2-D temperature distributions was established by combing the Lvevenberg-Marquardt algorithm and the Hottel and Broughton emissivity models. The experimental results revealed that both laser-induced plasma (LIP) and plasma jet (PJ) torches had positive effects on combustion stabilization, and LIP had better effect on combustion enhancement. In the ignition stage of a fuel/air mixture with an equivalence ratio of 1.0, the average temperature of a flame initiated by LIP combustion enhancement was 100 K higher than that by PJ torch combustion enhancement. A recirculation zone was formed inside a cavity, which improved the combustion stability. The injected fuel and inflow were most fully mixed on the slope at the rear of the cavity, where 70 % and 65 % of the peak flame temperature points of LIP and JP were located, respectively. The combustion in the RBCC chamber showed an oscillation phenomenon that peak flame temperature and the flame structure oscillated continuously around the central axis with a horizontal extent of 162 mm. Due to the insufficient fuel blending, the oscillation amplitude was minimal when the equivalence ratio was 1.0. Overall, the results of flame temperature distributions demonstrated that the proposed multispectral thermometry was suitable for measuring temperatures of supersonic combustion flames.

EDGE DETECTION TECHNIQUE FOR EXPERIMENTAL DIAGNOSIS IN ROCKET MOTOR

Particle tracking in combustion chamber of solid rocket motor

Experimental study of particle trajectories in solid rocket motor chamber

Particle Velocity on Solid-Propellant Surface Using X-Ray Real-Time Radiography

INNER VIEW OF DUAL-PULSE SOLID ROCKET MOTOR DURING SECONDARY FIRING

Experimental Investigation Of Crack/Debond Propagation Process In Burning Test Motor

Burning Rate Enhancement Analysis Of End-Burning Solid Propellant Grains Based On X-Ray Real-Time Radiography

Experimental study of particles trajectory in firing solid rocket motor with RTR technique part: (I) analysis of feasibility and experimental results

Experimental study of particles trajectory in firing solid rocket motor with RTR technique (2). The application of image processing technique

New Method to Determine the Velocities of Particles on a Solid Propellant Surface in a Solid Rocket Motor

Solid Propellant Charge Defect Detection Based on Endoscopic Detection Technology

Guided Filter-Based Edge Detection Algorithm for ICT Images of Solid Rocket Motor Propellant

DETERMINATION OF INJECTION BOUNDRY CONDITION OF PARTICLES IN SRM CHAMBER BASED ON RTR TECHNIQUES

X-Ray Diagnostic Research on End Burning Rule for Fuel-rich Propellant

Experimental Method of Mixing and Combustion in Solid Propellant Air Turbo Rocket

EXPERIMENTAL STUDY OF TYPICAL DEFECT PROPAGATION PROCESSES IN SOLID ROCKET MOTORS

Study on flow and combustion characteristics in the thrust chamber of powder rocket

3D Trajectory, Morphology and Phase Discrimination of Burning Al/AP Propellant Particles with Time-Resolved Astigmatic Dual-Beam Interferometric Particle Imaging

Image Detection and Parameter Estimation on Flame Images of Solid Rocket Motor

Automatic X-ray Inspection for Escaped Coated Particles in Spherical Fuel Elements of High Temperature Gas-Cooled Reactor

Experimental detection of two-dimensional temperature distribution in Rocket-Based Combined Cycle combustion chamber using multispectral imaging processing