Abstract:In this paper, a miniaturized narrow-band surface acoustic wave (SAW) filter with low loss, high near-skirt selectivity, and wide stopband is designed, presented, and verified. The proposed 4th-order bandpass filter is composed of a 5-IDT double-mode SAW (DMS) and two synchronous resonators. Firstly, the equivalent in-line extracted-pole circuit is investigated by applying the nodal representations of both the DMS and the synchronous resonators. Then, the bandpassdomain generalized Chebyshev filtering polynomials of the filter is derived by the direct synthesis technique (DST) according to the filtering specifications. And the values of the Eigen frequencies and the frequency invariant (FIR) susceptance are determined by the partial extraction procedure. Based on the synthesized initial dimensions, the performance of the filter can be easily optimized by the coupling-of-modes (COM) model. For verification, a filter prototype is implemented on the piezoelectric on insulator (POI) substrate, with a center frequency of 2493 MHz for Beidou navigation systems, a 3-dB fractional bandwidth of 2.09%, a measured minimum in-band insertion loss of only 0.99 dB, a footprint of only 0.345 mm × 0.55 mm, a small temperature coefficient of temperature (TCF) of -6.2 ppm/and a rejection level of better than 40 dB over the lower stopband and 35 dB over the higher stopband.

Saw Filter With Insertion Loss Of 2db And Fractional Bandwidth Of 30 Percent

Technique for Low-Loss and Wideband Surface Acoustic Wave Filters

A triple-mode ring dielectric resonator band-pass filter using substrate integrated waveguide (SIW)

Ultra‐wideband Bandpass Filter Using Half‐mode T‐septum Substrate Integrated Waveguide with Electromagnetic Bandgap Structures

Design and performance of SAW low insertion loss filters (2) Transversely-coupled resonator filter

Wideband Low-Loss Filter with Compact Size and Wide Stopband Based on Folded Planar Waveguide

An Ultra-Wideband Filtering Hybrid Ring Coupler with Super Wide Upper Stopband

Self-Packaged Mm-Wave Broadband Air-Filled SIW Filtering Power Divider with Sharp Roll-Off Skirt and High In-Band Isolation

Design of Miniaturized Narrow-Band POI-SAW Filter Using Mixed Ladder-DMS Topology

Ultra-Wideband Filtering 180° Hybrid Coupler with Super Wide Upper Stopband Using Swap Phase Inverter and Electromagnetic Bandgap Structures on Double-Sided Parallel-Strip Line

Near 30% Fractional Bandwidth Surface Acoustic Wave Filters with Novel Electrode Configuration

Simulation and design of wide-band, low-loss longitudinal coupling filters

Design of 2-Track DMS SAW Filter with Low Loss, High Selectivity and Compact Size for Band-29 Applications

Narrow-Slot Bandpass Filter Based on Folded Substrate-Integrated Waveguide with Wide Out-Of-Band Rejection

A Wide Stopband Low-Pass Filter With High Roll-Off Using Stepped Impedance Resonators

Narrowband SIW-SSPP Hybrid Bandpass Filter With Compact Profile at Ka-Band

Design of W-band Fin-Line Bandpass Filter with Broadband and Low-Insertion Loss Performance

A Wideband Mixer Designed with Low Conversion Loss Through the Entire W-Band

Suppression Of Spurious Responses For Ultra-Wideband And Low-Loss Saw Ladder Filter On A Cu-Grating/15 Degrees Yx-Linbo3 Structure

A Hybrid Microstrip/SAW-Resonator Wideband Bandpass Filter

Wideband Out-Of-Phase Siw Power Divider with Enhanced Stopband