Abstract:A microstrip bandpass filter with enhanced stopband rejection was designed based on the temporal coupled-mode theory in order to realize the signal isolation between transmitter and receiver (TR)channels in radio frequency (RF) transceiver systems.The filter consisted of two microstrip resonators,one supports an odd and an even mode,and the other supported an even mode.These three resonant modes coupled with each other,producing a transmission zero at low frequency below the passband,and two transmission zeros at high frequency above the passband.High frequency selection,passband flatness,and good stopband rejection above the passband were achieved.A C-band triple-mode microstrip bandpass filter was taken as an example.The characteristics of the filter with enhanced high-frequency stopband rejection can be accurately calculated by using temporal coupled-mode theory,and the coupling relationship among the three resonant modes can be obtained.The filter structure which satisfies the coupling relationship can be finished by using electromagnetic eigenmode simulation.The proposed filter was fabricated and tested.The test results matched the theoretical prediction well.Results show that the filter can be effectively applied in the isolation between TR channels in RF transceiver systems.The temporal coupled-mode theory can highly improve the design efficiency of filters with multi-mode coupling,which can achieve the required filter response of the system with high speed.

Design and performance of SAW low insertion loss filters (2) Transversely-coupled resonator filter

Broadband Filter Based on Stub-Loaded Ridge Substrate Integrated Waveguide (SIW) in Low Temperature Cofired Ceramic (LTCC)

Substrate Integrated Waveguide Filter with Flat Passband Based on Complex Couplings

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Design of microstrip bandpass filter with enhanced stopband rejection based on coupled-mode theory

Novel Bandpass Filters by Using Cavity-Loaded Dielectric Resonators in A Substrate Integrated Waveguide

Wideband Surface Acoustic Wave Filter at 3.7 GHz With Spurious Mode Mitigation

A Low-Loss Wideband SAW Filter with Low Drift Using Multilayered Structure

Design and fabrication of 2.45G miniaturized band pass filter by LTCC technology

Design and performance of a compact forward-coupled HTS microstrip filter for a GSM system

Low-Loss Compact SIW Filters with Shielded Complementary Split-Ring Resonator

Simulation and design of wide-band, low-loss longitudinal coupling filters

Design of Miniaturized Narrow-Band POI-SAW Filter Using Mixed Ladder-DMS Topology

A Narrow Band Dual Mode Hts Patch Filter with High Power Capability

Design of Substrate Integrated Waveguide Transversal Filter With High Selectivity

Design of 2-Track DMS SAW Filter with Low Loss, High Selectivity and Compact Size for Band-29 Applications

Simulation and design of double coaxial microwave dielectric filter

Ultra-Low-Loss Millimeter-Wave LTCC Bandpass Filters Based on Flexible Design of Lumped and Distributed Circuits.

Over GHz bandwidth SAW filter based on 32<SUP></SUP> Y-X LN/SiO<sub>2</sub>/poly-Si/Si heterostructure with multilayer electrode modulation

Over GHz bandwidth SAW filter based on 32° Y-X LN/SiO2/poly-Si/Si heterostructure with multilayer electrode modulation

Simulation design of a novel micro-strip absorption band-pass filter