Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Simulation and design of double coaxial microwave dielectric filter

Structure Design and Simulation of a 2400 MHz Microwave Dielectric Dual-Mode Filter

A triple-mode ring dielectric resonator band-pass filter using substrate integrated waveguide (SIW)

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

A Novel Surface-Mounted Monoblock Dielectric Filter

Novel Bandpass Filters by Using Cavity-Loaded Dielectric Resonators in A Substrate Integrated Waveguide

Structure design and analysis of a 4th-degree dielectric dual-mode filter

Applications of microwave dielectric materials in filter design

Design of Leakywave Coaxial Cable Compatible for Both 2g and 3g Wireless Communications

Simulation and design of wide-band, low-loss longitudinal coupling filters

DESIGN AND FABRICATION OF AN HTS DIELECTRIC FILTER

Design and performance of SAW low insertion loss filters (2) Transversely-coupled resonator filter

Design of Coaxial Line Low Pass Filter

Design of Coaxial Cavity Filter Based on MEMS Processing

Millimeter-wave dual-mode filter using circular high-order mode cavities

Design of an Economical Compact Coaxial Cavity Combline Filter for 3G TD Base Station

Co‐design of a Filtering Antenna Based on Multilayer Structure

Co-Design of Wideband Filtering Dielectric Resonator Antenna with High Gain

Design of Microwave Interdigital Bandpass Filter

Design of planar metal stripline filter and diplexer with frequency‐dependent couplings