Abstract:Performances of point contact EHL on multilayered or coated substrates have been analyzed in this paper via computer simulations, with emphasis on comparing the effects of Newtonian and non-Newtonian lubricants. The lubrication system consists of a rigid ball in contact with a smooth coated flat. The coating is perfectly bonded to an elastic substrate and it has a uniform thickness. The rigid ball has surface velocity U relative to the contact point. The hydrodynamic pressure p is governed by a generalized Reynolds equation in which the non-Newtonian effects of lubricants are characterized by two factors whose values are determined based on lubricant rheology. The Papkovich-Neuber potentials were employed to get the response functions in frequency domain for layered contact problems, and the influence coefficients relating pressure to surface displacements and stresses can be obtained via invert Fourier transform. The surface deformation was then calculated in terms of the pressure-displacement influence coefficients and the DC-FFT method was used to speed up the computation. The distributions of pressure, film thickness and subsurface stress have been analyzed for lubricants with different rheological behaviors, from which pressure and film thickness profiles along the rolling direction are calculated for Newtonian and Non-Newtonian lubricants. The central film thickness become thicker for stiffer coatings in the case of Newtonian lubricants, but the trend is reversed for Non-Newtonian lubricants. The surface stresses along the rolling direction show a spike corresponding to the pressure, which is more significant with stiffer coatings in the Newtonian case, but the spike is less visible for Non-Newtonian lubricants.

Numerical Analysis for Influences of Running-in Process on the Lubrication Properties MathematicalModel

A Thermal Equilibrium Analysis of Line Contact Hydrodynamic Lubrication Considering the Influences of Reynolds Number, Load and Temperature

Numerical Thermal Analysis of Greased Rolling Bearing Considering Surface Topography and Plastic Deformation

The Non‐newtonian Effect of Temperature on Hydrodynamic Lubrication Failure

A Computer Thermal Model of Mixed Lubrication in Point Contacts

Numerical Analysis on the Effect of Transverse Surface Roughness in Non-Newtonian Fluid Lubrication

The Comparison Of Four Pressure-Thermal Models Of Oil Film Bearing With The Non-Newtonian And Temperature-Viscosity Effects

Influence of Thermal Effects on Elastohydrodynamic (EHD) Lubrication Behavior at High Speeds

Numerical Analysis Of Point Contact Ehl On Coated Substrates

Numerical Analysis of Transient Elastohydrodynamic Lubrication of Helical Gears

Thermal-structure interactions on the nonlinear behavior of the heavy-load mechanical press with multiple clearance-induced joints

Numerical simulations for the fluid-thermal-structural interaction lubrication in a tilting pad thrust bearing

Numerical Analysis on Effect of Regular Surface Topography in Non-Newtonian Fluid Lubrication

Thermal mixed elastohydrodynamic lubrication modeling and analysis of the lubricated non-conformal contacts with non-Gaussian surface roughness and coating

Deterministic Solutions and Thermal Analysis for Mixed Lubrication in Point Contacts

Investigation on the nonlinear dynamic behaviors of water-lubricated bearings considering mixed thermoelastohydrodynamic performances

Elastohydrodynamic Lubrication Analysis on Line Contact Lubricated with Grease

Aspects of modeling and numerical simulation of dry point contacts between viscoelastic solids

Numerical Prediction of Surface Wear and Roughness Parameters During Running-In for Line Contacts under Mixed Lubrication

Transient mixed thermal elastohydrodynamic lubrication analysis of aero ball bearing under non-steady state conditions

A thermal model in frictional contacts