Abstract:Dry granular materials are composed of a dense random packing of macroscopic grains. As a small amount of liquid is added to granular samples, the liquid bridge forces, i.e. the force between liquid and the grains, have an influence on the mechanical properties of wet granular materials, and some are quite different from those of dry granular materials. In this work, by measuring the acceleration of the sample chamber and the force exerted on it by the shaker, the variation of bulk modulus and energy dissipation of both dry and wet glass bead samples with pressure and viscosity under vertical vibration was studied. The results show that:(1) Under low saturation, the bulk modulus of dry and wet glass bead samples show power law scaling law with pressure, which is close to the power law relationship predicted by the efficient medium theory on the basis of Hertz contact potential. A small amount of liquid increases the bulk modulus of glass bead samples. At the same pressure and liquid content, the bulk modulus of wet glass bead samples increases with the increase of liquid viscosity. Based on Hertzian contact mechanics, an efficient elastic network model is proposed to illustrate the increasing mechanism of bulk modulus of wet glass bead samples. (2) The energy dissipation of dry and wet glass bead samples decreases with the power law of pressure, and the energy dissipation of wet glass bead samples is proportional to the kinematic viscosity of liquid. (3) With the increase of strain amplitude, the softening behavior of the wet glass bead samples is similar to that of the dry glass bead sample, when the strain amplitude is higher than the strain threshold value. The kinematic viscosity of liquid inhibits the softening behavior of glass bead samples.

EXPERIMENTAL STUDY ON ENERGY-ABSORPTION PROPERTIES OF GLASS-EPOXY CYLINDRICAL SHELLS

Studies on Compressive Behaviors of Hollow Glass MicrospheresFilled Epoxy Resin Composites

Experimental Investigation on the Crashworthiness of Braided Glass/Epoxy Tubes Subjected to Axial Impacting

Energy Absorption Properties Of Braided Glass/Epoxy Tubes Subjected To Quasi-Static Axial Crushing

Experimental Study on Modulus and Dissipation of Dry and Wet Glass beads Samples under Vertical Vibration

Investigating the Mechanical Behavior and Energy Absorption Characteristics of Empty and Foam-Filled Glass/Epoxy Composite Sections under Lateral Indentation

On the energy absorption in a novel CoFeSiB metallic‐glass fiber/epoxy resin composite under quasi‐static and dynamic compression conditions

Crush Analysis of Hybrid Glass/Nano-Silica/Epoxy Composite Cylinders Under Lateral Loading Conditions

Experimental Research on the Mechanical Properties of Tailing Microcrystalline Foam Glass

Experimental and Numerical Analysis of the Microstructure and Mechanical Properties of Unidirectional Glass Fiber Reinforced Epoxy Composites

Experimental Investigation into In-Plane Bearing Capability of Single-Layer Glass Panels with Overlapped Connectors

Experimental and numerical buckling analysis of carbon fiber composite cylindrical shells under external pressure

The Study Of Interfacial Energy Of Glass Fiber Reinforced Composites By Afm And The Mechanical Property Of The Composites

Experimental Test on Loading Capability of Glass Panels with Overlapped Connectors

Experimental Investigations on Deformation and Fracture Behavior of Glass Sphere Filled Epoxy Functionally Graded Materials

Experimental investigation of the impact behavior of glass/epoxy composite materials with the natural fiber layer

Energy absorption of diamond lattice cylindrical shells under axial compression loading

Study on the Viscoelastic Properties of the Epoxy Surface by Means of Nanodynamic Mechanical Analysis

Experimental Study of the Carrying Capacity of Point-Supported Glass Panels Subjected to Loads in the Panel Plane

Energy Absorption of Foam-Filled Lattice Composite Cylinders under Lateral Compressive Loading

Lateral compressive behavior of multi-layer lattice-web reinforced composite cylinders