Abstract:By using a SHPB device combined with high-speed photography technology, low-velocity impact experiments of quartz glass beads with diameters of 7.90, 11.80 and 15.61 mm were carried out by means of respectively three kinds of transmission bars, i.e., steel bar, aluminum bar, and polymethyl methacrylate (PMMA) bar. According to the load-displacement curves in the breakage process of glass beads under different transmission bar conditions, combined with the load adjustment of glass beads under impact and the strain of glass beads during the experiment, the influence of stress adjustment on the breakage process of glass beads subjected to low-velocity impact is explored. The results show that under the same impact conditions, the adjustment of the material of the transmission bar will alter the load distribution in the glass bead during impact breakage, that is, the change of the wave impedance at the transmission end will change the reflected wave, which leads to the load adjustment in the process of multiple reflection loading. When the transmission bar is made of aluminum and PMMA, the load in the glass bead decreases obviously during the crushing process, and the stress adjustment duration of the glass bead becomes longer with more deformation of the cushion block during the loading process. When the transmission bar is made of steel, the strain in the glass bead is the largest at both ends, while the closer to the middle of the bead, the smaller the strain. For the glass beads loaded with aluminum and/or PMMA transmission bar, local unloading behavior is found at the transmission end of bead. By employing the PMMA transmission bar, the local stress and deformation both decrease, resulting in the glass bead being broken with larger deformation. It is further shown that glass bead breakage is controlled by local deformation and local deformation gradient.

Experimental Study on Modulus and Dissipation of Dry and Wet Glass beads Samples under Vertical Vibration

Experimental Study on Bulk Modulus and Dissipation of Dry and Wet Granular Samples under Vertical Vibration

Glass Transition in Gels

Physically-based Interpretation of Abnormal Stress Relaxation Response in Glassy Polymers

A Finite Deformation Fractional Viscoplastic Model for the Glass Transition Behavior of Amorphous Polymers

Glass Beads Test with True Triaxial Stress Path Achieved by Conventional Triaxial Apparatus

Research On Relative Energy Dissipation In Sheared Granular Materials

Modelling the Mechanical Behaviours of Glassy Hydrogels

Statistical Model Predicts Softening and Fluidization Induced by Vibration in Granular Materials

Acoustic Detection and Nonlinear Response of Granular Materials under Vertical Vibrations

Experimental Study on Dynamic Characteristics of Saturated Soft Clay with Sand Interlayer under Unidirectional and Bidirectional Vibration

Effect of stress-state adjustment on fragmentation behavior of quartz glass beads subjected to low-velocity impact

Shear strength properties of wet granular materials

Frozen-to-jamming-to-fluid Transition of Weakly Sheared Granular Systems by Low-frequency Mechanical Spectroscopy

Measurement of Restitution and Friction Coefficients for Granular Particles and Discrete Element Simulation for the Tests of Glass Beads

The force and dynamic response of low-velocity projectile impact into 3D dense wet granular media

Friction and relative energy dissipation in sheared granular materials.

Shear Mechanism and Optimal Estimation of the Fractal Dimension of Glass Bead-Simulated Sand

High-temperature friction characteristics of N-BK7 glass and their correlation with viscoelastic loss modulus

Anisotropic nonlinear elasticity in a spherical bead pack: influence of the fabric anisotropy

Damage to Rigid-Particle-filled Polymer under Cyclic Tension