Abstract:There are too many methods to enhance the performance of ceramic cutting tools. All the methods can be sorted into two types: inner modification and surface modification. One of the main method to the inner modification of ceramic cutting tools is dispersion strengthening. Usually, in order to enhance the performance of ceramic cutting tools, some dispersed phases of TiN, TiC or TiCN, Al2O3, and/or ZrO2, and so on, and/or some whiskers, or fibers were added into the ceramic matrixes. And the new types of cutting tools, which possessed much more excellent performance than the original ones, were called composite ceramic cutting tools. For the composite Si3N4-based ceramic, Al2O3-based ceramic, and TiCN-based cermet, the cutting efficiency could be enhanced to 3similar to10 times, compared with cemented carbide tools. And they can be used for rough and finish machining of various cast iron workpieces and hardened steels, respectively, including milling and planning. Ion implantation is a surface modification for ceramic cutting tools. With certain doses of metals, for example, titanium, zirconium and chromium, and so on, implanted into the ceramics, the hardness, Young's modulus, fractural toughness, and bending strength, etc., can be enhanced. For Al2O3 and Si3N4 ceramics, the hardness, Young's modulus, and bending strength increased with a maximum factor of 50%, and the flank wear decreased with a factor of 2similar to12, compared with the unimplanted ceramic cutting tools. However, the main shortcoming of ion implantation to modify ceramics is the thickness of modified layers. They are, usually, too thin for cutting tools. The so-called PHEDP, pulsed high energy density plasma, is another surface modification method for ceramic cutting tools proposed recently. With such method, much thicker coatings of TiN, TiCN and (Ti,Al)N, etc, were deposited onto Si3N4 and WC ceramic cutting tools. The main merits involved in high hardness and Young's modulus of the coatings, low residual stresses, and good adhesive strength between the coatings and substrates. And the flank wear of the as-deposited tools decreased with a factor of 5similar to10.

STUDY ON CUTTING PERFOR-MANCE OF NANO-CEMENTED CARBIDE CUTTING TOOLS

Preparation and Cutting Performance of Nanoscaled Al2O3-coated Micro-Textured Cutting Tool Prepared by Atomic Layer Deposition

Wear mechanism and cutting performance evaluation of fine ceramic tools

Investigation on Cutting Performance of Micro-Textured Cutting Tools

Mechanical property and cutting performance of CNTs reinforced cBN cutting tools by spark plasma sintering

Cutting performance of the nanotwinned cBN tool in nano-cutting of Ni-Cr-Fe alloy

Studies on Si3N4 Ceramic Cutting Tool Materials and Their Applications

STUDY ON THE WEAR PERFORMANCES OF CERAMIC TOOLS FOR MACHINING 304 STAINLESS STEEL

Mechanical properties and cutting performance of laminated graphene composite ceramic tools

Effects of nano-Al2O3 addition on microstructure, mechanical properties, and wear resistance of Ti(C, N)-based cermets

Addition of Nano CaF2@SiO2 and SiC Whiskers in Ceramic Tools for Wear Reduction and Improved Machinability

Cutting performance of cubic boron nitride-coated tools in dry turning of hardened ductile iron

Cutting performance and wear behavior of diamond, coated cemented carbide and PCBN tools during milling of C f /SiC composites

Cutting performance of tools made of different materials in the machining of 42CrMo4 high-strength steel: a comparative study

Effect of Si3N4 Additive on Microstructure and Mechanical Properties of Ti(C,N)-Based Cermet Cutting Tools

Cutting performance and tool wear mechanism of corrugated helical PCD tool in milling Cf/SiC composites

Effect of Composite Bionic Micro-Texture on Cutting Performance of Tools

Investigation on the Modification Methods to Ceramic Cutting Tools

Mechanical property and cutting performance of (W,Ti)C based ceramic composites with the addition of nano-sized CaF2