Abstract:To enlarge the application of single-layer reticulated shells, this study proposes an innovative semi-rigid joint based on the original bolt-column (OBC) joint, referred to as the improved bolt-column (IBC) joint. The mechanical behavior of the IBC joint under the pure load and the coupling effect of bending and axial force is investigated using numerical tests. Then, the practical analytical model of IBC joint is developed based on a three-parameters power model and component method. Subsequently, a mechanical model considering joint stiffness is developed to establish semi-rigidly connected single-layer cylindrical reticulated shell. A total of 456 numerical models of shells are conducted to examine the impact of different kinds of joint stiffness on the load-carrying capacity of shells systematically. The results demonstrate that (i) weak axis bending stiffness and axial stiffness significantly affect the load-carrying capacity of shells by approximately 19 % and 14 % on average respectively; (ii) strong axis bending stiffness and torsional stiffness have relatively minor effects on the critical load of shells, with average decline ratios of only 5 % and 6 % respectively; (iii) out-of-plane shear stiffness and in-plane shear stiffness exhibit negligible impacts on the load-carrying capacity of shells, with an average effect not exceeding 1 %. Finally, the findings of numerical simulation considering all stiffness of IBC joint reveal insights into both varying laws of load-carrying capacity and failure modes for shells. It is observed that the mean critical load can reach up to 59 % of the one of rigidly-connected shells, which is significantly higher than those observed in shells with pinned joints.

Tangent stiffness matrix of members of latticed shell considering joint's stiffness

Research on Prestressed Single-Layer Latticed Intersected Cylindrical Shells

Configuration, Static and Stability Analysis of Torsional Lattice Shell Composed of Six-bar Tetrahedral Units

Element stiffness matrix for Timoshenko beam with variable cross-section

Warping and Bimoment Transmission Through Diagonally Stiffened Beam-to-column Joints

Accurate Stiffness Matrix for Nonprismatic Members

RIGIDITTY OF WELDED HOLLOW SPHERICAL JOINTS ON FINITE ELEMENT ANALYSIS PRECESION OF RETICULATED SHELLS

Tangent Stiffness Matrix of Spatial Beam Element Considering Bend and Torsion Coupling Effect

Finite element analysis of T-shaped stiffened composite plates based on effective stiffness matrix

Geometric stiffness matrix of thin-walled beam-column elements considering coupling effects

Element Stiffness Matrix Of Spatial Thin-Walled Beams Considering Coupled Shear Deformations

Analysis of the influence of joint's rigidity on the ultimate bearing capacity of single layer spherical reticulated shell

Isogeometric Stiffness Matrix Formulations for Buckling Analysis of Multi-Layered Shells Based on Lamination Parameters for Solid-Shell Elements

Experimental Study on the Semi-rigid Joint Stiffness of Single-layer Reticulated Timber Shell

Buckling Load Analysis of Composite Grid Stiffened Structure Skirts

Refined spatial beam-column element for second-order analysis of lattice shell structure

Effect of joint stiffness on the load-carrying capacity of single-layer cylindrical reticulated shell with improved bolt-column (IBC) joint

Exact Solutions for Torsion and Warping of Axial-Loaded Beam-Columns Based on Matrix Stiffness Method

Influence of Joint Stiffness on Seismic Response and Internal Force of the Single-Layer Cylindrical Reticulated Shell

Element Stiffness Matrix of Spatial Thin-Walled Beams Considering the Coupling of Flexure and Torsion

Exact Tangent Stiffness for Imperfect Beam-Column Members