Abstract:Accurate and efficient beam-column elements are of great importance in predicting nonlinear response of reinforced concrete (RC) frame structures under seismic loads.The fiber-based model could accurately predict flexural hysteretic response of RC members by using uniaxial stress-strain relations to model concrete and reinforcements, respectively [1,2].However, the fiber-based model fails to consider the shear deformation due to the plane-sections-remain-plane assumption, which limits its application in shear-critical members, such as short columns and coupling beams.So far, the shear response of fiber-based beam-column element was considered by two ways.First, the Timoshenko beam theory was applied along with fiber model to include the degree of freedom (DoF) of shear at the sectional level.In this way the multi-axial constitution model of concrete was generally required to consider the shearflexure interaction [3-6], which limits the computational feasibility and efficiency of the models.Another approach was to consider shear response by introducing a spring at the end of the beam-column member.In this case the flexural behavior of RC member was simulated by using fiber model, and the shear was modelled by elongation of the spring in transverse direction.As a result, the shear and flexural behaviors can be modelled separately with a higher efficiency compared to the former approach.It should be noted that the empirical force-deformation relations required by shear spring were generally obtained from global hysteresis tests.It means that the component-end lumped spring is incapable of modelling shear response of RC members which is sensitive to local shear deformation accurately [7][8][9][10].Therefore, this study presents a new beam-column element to consider local shear effect of member with reasonable numerical accuracy and computational efficiency.The flexure and axial response of the proposed element is modelled by traditional fiber model.The shear deformation is decomposed from the axial and flexural deformations in the element.The total transverse displacement of the element is induced by flexure and shear.The transverse displacement caused by flexure can be determined by element length and corresponding rotation, thus shear deformation is the subtraction of calculated flexure transverse displacement from total transverse displacement.The shear deformation in any segment of element can be calculated by this method.The shear deformation of the element can be obtained by summing the shear deformation of these segments.Finally the element stiffness matrix is assembled as the sum of shear and flexure stiffness using the principle of virtual work.It can be seen above that the local shear effect of the member can be considered by the proposed element, resulting in a more accurate prediction compared with component-end lumped spring.

Refined spatial beam-column element for second-order analysis of lattice shell structure

Element stiffness matrix for Timoshenko beam with variable cross-section

Beam-Column Element for Vibration Analysis of Rotating Beam

A New Efficient Geometric Nonlinear Beam-Column Element

Fully Conforming Plane Beam Element for Large Deformation Analysis

Exact Tangent Stiffness for Imperfect Beam-Column Members

Tangent Stiffness Matrix of Spatial Beam Element Considering Bend and Torsion Coupling Effect

A New Beam Element for Analyzing Geometrical and Physical Nonlinearity

Stability analysis of thin-walled members by degenerated three-dimensional beam element method

Second-Order Direct Analysis of Domelike Structures Consisting of Tapered Members with I-Sections

Element Stiffness Matrix Of Spatial Thin-Walled Beams Considering Coupled Shear Deformations

New spatial curved beam and cylindrical shell elements of gradient-deficient Absolute Nodal Coordinate Formulation

A new spatial thin-walled beam element including transverse and torsional shear deformation

Spatial Fine Beam Model Based on Vector Form Intrinsic Finite Element Analysis

An Improved Beam Element for Beams with Variable Axial Parameters

Static, Vibration, and Transient Dynamic Analyses by Beam Element with Adaptive Displacement Interpolation Functions

A Refined Finite Element Formulation for Flexural and Torsional Buckling of Beam–columns with Finite Rotations

Finite-element implementation for nonlinear static and dynamic frame analysis of tapered members

Development and Application of Mixed Element Based on Hellinger-Reissner Variation

Simplified Fiber Beam-column Element Considering Local Shear Effect

Generalized Conforming Element For The Analysis Of The Laminated Composite Plates