Abstract:The grazing-incidence optics with Wolter-I type geometry is commonly used in X-ray astronomy. The manufacturing technologies are still under development for future space missions to fulfill the stringent performance requirements with reduced weight and cost, e.g. the planned enhanced X-ray Timing and Polarimetry Mission. To improve the manufacturing process, it is necessary to study the relationship between metrological characterization and angular resolution via ray-optics or wave-optics models. The model calculations produce inconsistent results depending on the characteristics of wide-band surface errors, which require validation before their application in the Wolter-I type optics. In this work, two samples of the single-reflection mirrors with an elliptical shape are produced to validate the models. The first sample uses the Aluminum alloy substrate and the second sample uses the Aluminum alloy coated with Nickel-Phosphorous as the substrate. Tungsten is coated on both substrates to increase the X-ray reflectivity. The metrological characterization is inspected using the Fizeau interferometer and 3D optical profiler. The X-ray calibration of the mirror is performed in the 100-m X-ray Test Facility of Institute of High Energy Physics using the Color X-ray Camera. Both ray-optics and wave-optics models are validated in a wide scope of applications from smooth to relatively rough surfaces. The proper treatments of the metrological data are required as input to the model calculations: the post-fit distribution of figure errors, the micro-roughness defined in a specific frequency band, and the smoothed power spectral density of the surface errors. The validated models can be further applied in Wolter-I optics to predict mirror performances or to provide precision processing requirements.

Experimental study on X-ray Bragg-Fresnel optics

Fabrication of soft X-ray Bragg-Fresnel optical device with laser holography

Optical Design and Fabrication of the off Axis Paraboloid and Ellipsoidal Mirrors of Beam Line for Synchrotron Radiation Biological Spectroscopic Experiments

Flat Optical Lens by Use of 90-Degree Volume Holographic Grating Recording Geometry and Nonvolatile Thermal Fixing in LiNbO3:Fe Crystal

Design, Fabrication and Characterization of Dispersive Mirrors for Ultrafast Lasers

Fabrication and Performance of Etched Multilayer X-Ray Optics

Study of the relationship between metrological characterization and angular resolution in grazing-incidence X-ray optics

Manufacturing and Testing of X-ray Imaging Components with High Precision

Reflectance Test Method of X-ray Optics on the 100-M X-ray Test Facility

Optimization Design of Pt/C Multilayer Supermirrorsfor Hard X-rays

Fabrication and application of X-ray zone plates

Simulation of an X-ray Fresnel Zone Plate with Nonideal Factors

Simulation and an Experimental Study on the Optical Performance of a Wolter-I Focusing Mirror Based on a 3D Ray Tracing Algorithm.

Fabrication of Fresnel zone plates with high aspect ratio by soft X-ray lithography

Design and fabrication of soft x-ray blazed diffraction gratings

X-ray Imaging Fresnel Zone Plates and Fabrication

X-ray multilayer mid-frequency characterizations using speckle scanning techniques

Reflectivity test method of x-ray optics at the 100-m x-ray test facility

Wavefront Sensing and Surface Shape Measurement Based on Microfocus X-Ray Grating Interferometer

Etching of Multilayer Grating Using a Narrow Spectral Band X-ray

Precision Polishing of the Mandrel for X-Ray Grazing Incidence Mirrors in the Einstein Probe