Abstract:Exploring the bonding mechanisms within bimetallic composite plates throughout the cold rolling process poses a considerable challenge, especially in simulating the bonding between different metals. A novel finite element model for rolling, grounded in Lemaitre continuum damage theory, was developed using copper/aluminium composite plates as a case study to characterize the dynamic bonding process in cold rolling precisely. The model replicates the dynamics of crack formation at the metal interface, the subsequent flow of the matrix metal through these fissures, and the ensuing contact. Considering the intricate stress conditions at the interface during rolling and the influence of compression on damage accumulation, the damage evolution constant in the original Lemaitre model has been revised. This modification aims to improve the model's performance in dominant shear forces and low-stress triaxiality scenarios. The damage constant has been transformed into a variable correlating with the Lode parameter and the degree of stress triaxiality to achieve this. The model parameters were calibrated using force-displacement data derived from shear and tensile experiments. The rolling model is ingeniously designed, employing hardened layer elements as barriers to segregate the fresh metal. Experimental rolling trials and corresponding simulation analyses were performed on copper/aluminium composite plates with varying initial thickness ratios, specifically 1:2, 1.5:1.5, and 2:1. The outcomes demonstrated a high degree of agreement between the experimental and simulated profiles, including the post-rolling thickness ratios, with a maximum discrepancy of 6.1%. The finite element model effectively captured the deformation behaviour of the bimetallic material throughout the rolling process and elucidated the micromechanical processes underlying the interfacial bonding between the dissimilar metals.

Simulation of Rolling for H Beam by 3-Dimension Elastic-Plastic Finite Element

Computer Simulation for H-Beam Deformations during Hot Rolling

Stress and Strain Analysis of H-beam Universal Rolling in Different Flange Reductions

Tri-dimensional Elastic-Plastic Fem of Rolling Force During Strip Finishing Rolling Process

Numerical Simulation of Rolling Pressure for H-Beam Hot Rolling

Finite Element Analysis of Temper Rolling Process

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

The Simulation of Roll Forming with Multiple Passes

Continuous Fem Simulation of Multi-Pass Plate Hot Rolling Suitable for Plate Shape Analysis

Three-dimensional rigid–plastic finite element simulation for the two-roll cross-wedge rolling process

THERMOMECHANICAL COUPLED FINITE-ELEMENT MODELLING OF SLAB HOT ROLLING

Simulation of the rolling process of 4-high hot steel strip continuous mills

The Modeling and Simulation of the Guide Roller in Web Processing System

A FEA Simulation Model for Thin-Walled C-Section Composite Beam Assembling with R-Angle Deviation

Study on FEM Simulation of Cage Roll Forming of ERW Pipes

A dynamic composite rolling model based on Lemaitre damage theory

Three-dimensional elastic–plastic stress analysis of wheel–rail cyclic rolling contact using finite element method

The numerical simulation analysis of the straightening process of the large H-shaped steel

Continuous Finite Element Simulation of Plate Multi-pass Hot Roiling

Numerical Analysis of the Roller Hemming Process

FINITE ELEMENT ANALYSIS OF STEADY STATE HV ROLLING PROCESS OF SLAB