Abstract:In our previous work, the BSTN composite ceramics in which two phases of the perovskite (BST) and the tungsten bronze (SBN) coexist were successfully prepared in situ by controlling excess components in BaO-SrO-TiO2-Nb2O5 system. What the formation, microstructure and properties of BST and SBN mainly depend on Sr/Ba ratio is well known. The Sr/Ba ratio may affect the structure and properties of the composite ceramics, too. In this paper, the effects of Sr/Ba ratio on the phase composition and microstructure of the composite ceramics were investigated in detail. X-ray diffractometry (XRD) and scanning electron microscope (SEM) were used to characterize the phase composition and microstructure of the composite ceramics. The results show that the Sr/Ba ratio increases in the perovskite phase and keeps almost constant in the tungsten bronze phase with increasing the content of strontium in the two-phase-coexistence composite BSTN system. The constant Sr/Ba ratio in the tungsten bronze phase is about 0.667. The crystal lattices of the perovskite phase in composite system are larger or smaller respectively than them in pure (1-x)BaO center dot xSrO center dot TiO2 system when the Sr/Ba ratio is respectively <0.667 or >0.667. The crystal lattices of the perovskite phase in both systems show the same crystal lattices when the Sr/Ba ratio is 0.667. Affected by the ratio of Sr/Ba required in the tungsten bronze phase in the composite system, the contents of the perovskite phase decreases while the tungsten bronze phase increases with increasing ratio of Sr/Ba. For the same reason, the average grain size of the perovskite phase and the density of the composite ceramics decrease as the ratio of Sr/Ba increases. If the substitution of ions can take place both in the two phases in a composite system with two phases, the substitution will take place first in the phase with higher solubility of ions while it will be restrained in the other phase.

Study on semi-conductive properties and microstructure of (Sr, Pb) TiO3 ceramics

Influence Of Microstructure On The Properties Of Sr0.5pb0.5tio3v-Shaped Ptcr

Study on semiconductive characteristics of PTCR-type (Sr, Pb) TiO3 ceramics

Effect of SrLi<sub>1/4</sub>Nb<sub>3/4</sub>O<sub>3</sub> Additive on the Properties of Pb<sub>x</sub>Sr<sub>1-x</sub>TiO<sub>3</sub> Ceramics

Preparation and Properties of PbxSr1-xTiO3 Ceramics and Thin Films

The thermal sensitivity and dielectric properties of SrTiO3-based ceramics

A Study Of V-Shaped Ptc Behaviour Of Sr0.4pb0.6tio3 Ceramics

Influence of BaPbO3 doping on properties of (Sr, Pb) TiO3 ceramics

Microstructure and Antiferroelectric-Like Behavior of PbxSr1−xTiO3 Ceramics

Relationship of Composition and Microstructure to Sr/Ba Ratio of BSTN Composite Ceramics

Study on the Properties of SrxPb1-xTiO3-based Thermistors

PTCR-type semiconducting strontium-lead titanate ceramics prepared by chemical process

Effect of SrLi1/4Nb3/4O3 additive on the properties of PbxSr1-xTiO3 ceramics

Effect of Semiconductive Grain and Microstructure on the Dielectric Properties of Cacu3ti4o12 Ceramics with Sr2+ Doping

Crystal structure of (Sr, Pb) TiO3 complex perovskite ferroelectric ceramics

The PTCR effect of Ag+-modified strontium–lead titanate semiconducting ceramics doped with excess PbO

Effects of Ti nonstoichiometry on microstructure, dielectric, ferroelectric and piezoelectric properties of (Na0.54Bi0.5)(0.94)Ba0.06Ti1+xO3 lead-free ceramics

Phase, Microstructure and Conductivity of Electron-Doped Ba1La PbO3 Ceramics

Effects of Sintering Temperature on Microstructure, Electric Properties of Ba0.7Sr0.3TiO3 Ceramics

Composition-dependent electrical property of (1-x)Sr0.75Ba0.25Nb2O6-xPbZr0.52Ti0.48O3 solid solution ceramics

Influence of Doped Mn, Cu, Ni and Fe on Electrical Properties of SrTiO<sub>3</sub> Ceramics