Abstract:The main purpose of this work is to explore the influences of microstructures on the magnetic properties, as well as the formation mechanism of -Fe2O3/NiO core/shell nanoflowers. The synthesis of nanoflower-like samples includes three processes. Firstly, Fe3O4 nanospheres are synthesized by the solvothermal reaction of FeCl3 dissolved in ethylene glycol and NaAc. Secondly, Fe3O4/Ni(OH)2 core/shell precursor is fabricated by solvothermal method through using the early Fe3O4 spheres and Ni(NO3)26H2O in an ethanol solution. Finally, the precursor Fe3O4/Ni(OH)2 is calcined in air at 300 ℃ for 3-6 h, and therefore resulting in -Fe2O3/NiO core/shell nanoflowers. Their microstructures are characterized by using XRD, XPS, SEM, HRTEM and SAED techniques. The results show that the final powder samples are -Fe2O3/NiO with typical core/shell structure. In this core/shell system, the -Fe2O3 sphere acts as core and the NiO acts as shell, which are comprised of many irregular flake-like nanosheets with monocrystalline structure, and these nanosheets are packed together on the surfaces of -Fe2O3 spheres. The calcination time of Fe3O4/Ni(OH)2 precursor has significant influences on the grain growth, the NiO content and the compactness of NiO shells in the -Fe2O3/NiO core/shell system. VSM and SQUID are used to characterize the magnetic properties of -Fe2O3/NiO core/shell nanoflowers. The results indicate that the 3 h-calcined sample displays better ferromagnetic properties (such as higher ms and smaller HC) because of their high -Fe2O3 content. In addition, as the coupling interaction between the FM -Fe2O3 and AFM NiO components, we observe that the -Fe2O3/NiO samples formed in 3 h and 6 h display certain exchange bias (HE=20 and 46 Oe, respectively). Such a coupling effect allows a variety of reversal paths for the spins upon cycling the applied field, and thereby resulting in the enhancement of coercivity (HC(FC)=252 and 288 Oe, respectively). Further, the values of HE and HC for the former are smaller than those of the latter, this is because of the AFM NiO content in 6 h-calcined sample much higher than that in 3 h-calcined sample. Especially, the temperature dependences of the magnetization M of the two samples under both ZFC and FC conditions indicate that an extra anisotropy is induced. In a word, the size effect, NiO phase content, and FM-AFM (where FM denotes the ferromagnetic -Fe2O3 component, while AFM is the antiferromagnetic NiO component) interface coupling effect have significant influence on the magnetic properties of -Fe2O3/NiO core/shell nanoflowers.

Influence of laser synthesis parameters on the properties of Fe/C and Fe/N ultrafine particles

Influence of Different Preparation Methods on Crystallisation and Morphology of Fe2o3 Nanoparticles

A Novel Strategy for Designing Fe-Ni Gradient Multilayer Coatings Using Laser-Assisted Electrodeposition and Regulation Mechanism

Synthesis and Characterization of Fe/C Core–shell Nanoparticles

The Effect of Target Size on Α-Fe Nanoparticle Preparation by Pulsed Laser Ablation

The Effect Of Target Size On Alpha-Fe Nanoparticle Preparation By Pulsed Laser Ablation

Preparation and Characterization of Nanocrystals Znfe2o4 and Lafeo3

One-step Synthesis of Γ-Fe2o3 Nanoparticles by Laser Ablation

Laser-generated nanoparticles from Fe-based metallic glass in water and its amorphization control by pulsed laser processing

Oxidation Characteristics and Magnetic Properties of Iron Carbide and Iron Ultrafine Particles

Experimental and numerical investigation of laser-assisted electrodeposition based on amorphous forming: Laser-electrodeposition correlation and explanation of enhancing mechanism

Synthesis, Microstructure, and Magnetic Properties of -Fe2o3/nio Core/shell Nanoflowers

Microstructure and mechanical properties of Fe-based amorphous alloy coatings prepared by ultra-high speed laser cladding

Enhanced Microwave Absorption Performance of Fe/C Nanofibers by Adjusting the Magnetic Particle Size Using Different Electrospinning Solvents

The Effect of Particle Size of Nano NiZnCu Ferrite Powders on Sintering Behavior, Microstructure and Electromagnetic Properties

Effect of preparation conditions on morphology and structure of platelet CNF

Exploring the application of laser thermal effect in the multilayer gradient coatings designed by electrochemical deposition: Parameters, advancements, and limitations

The Effect of Surface Modification on the Microstructure and Properties of Γ-Fe2o3 Nanoparticles

Nanocrystalline WC/Co Grains Refined by Laser Sintering

Preparation of CNTs-supported Fe3O4 and Fe3C Nano-particles and the Investigation on their Magnetic Properties

Synthesis Process and Growth Mechanism of Γ′-Fe 4 N Nanoparticles by Phase-Transformation