Abstract:Bridge surfaces usually freeze more easily than road surfaces in wet and cold conditions, which is unfavorable to traffic safety. This study aims to develop an ice prediction model for bridge deck pavement structures by integrating external climatic factors and internal structure parameters, and to analyze the mechanism of ice condensation. This model adopted finite element analysis to deal with the heat transfer problem and the latent heat during the phase change process. A series of experiments were designed to validate the model, and the relative difference was around 10 %. Results shown that: among external climatic factors, the impact of changes in water accumulation on ice formation is not significant. Meanwhile, the air temperature has the greatest impact, and there is a non-linear relationship between wind speed and the initial freezing time. In the study on the effect of aging, it was found that aged asphalt concrete pavement would freeze earlier and melt later compared to new. When comparing different structures, it was observed that the initial freezing time of the bridge deck pavement structure was 0.8 h earlier than the road structure, and the total freezing time was 2.8 h shorter than the road structure. It was also found that the lower thermal conductivity would delay the occurrence of icing when the bridge deck pavement structure was in a cooling stage. Finally, it was observed that the vehicle speed played a critical role in determining the direction of the heat flow with a specific value, and the value would increase as the temperature difference decreased. This prediction model is useful for transportation agencies to understand the mechanism of pavement ice formation and ensure traffic safety in winter.

Model for prediction of automobile traction on ice

A new method for determining tire traction on ice

A Study on the Effects of Surface Roughness on Tire Traction Force on Ice

Optimization of the tire ice traction using combined Levenberg–Marquardt (LM) algorithm and neural network

Prediction of the Temperature on AMT Clutch-disc Surface Based on LS-SVM

Rubber Friction on Icy Pavement: Experiments and Modeling

Car-following Model and Its Stability under Ice and Snowfall Conditions

Effect of the experimental parameters on the ice-asphalt adhesion strength and corresponding theoretical model based on the energy-balanced principle

The mechanisms, evaluation and estimation of anti-skid performance of snowy and icy pavement: A review

Safety aspects on icy asphalt pavement in cold region through field investigations

Evaluation of Vehicle Braking Performance on Wet Pavement Surface using an Integrated Tire-Vehicle Modeling Approach

Influence of temperature on polishing behaviour of asphalt road surfaces

A Dynamic Model for Tire/Road Friction Estimation under Combined Longitudinal/Lateral Slip Situation

Modeling aircraft braking performance on wet and snow/ice-contaminated runways

Study on the Ice Friction Characteristics

Analysis on Adhesion Coefficient of Ice and Snow Pavement

Icing Time Prediction Model of Pavement Based on an Improved SVR Model with Response Surface Approach

Modeling and analysis of ice condensation on bridge deck pavement surface based on heat transfer theory and finite element method

Development and Testing of Heat- and Mass-Coupled Model of Snow Melting for Hydronically Heated Pavement

The Thin Ice Layer Brittle Fracture Stress Model And De-Icing Angle Optimization

Numerical Prediction of Spatio-Temporal Frosting Patterns of Curved Surface Considering Varying Working Parameters