Abstract:Phase behavior and rhythmically grown ring-banded spherulites in thin films of liquid crystalline poly(aryl ether ketone) (LC-PAEK) and poly(aryl ether ether ketone) (PEEK) blends have been investigated by differential scanning calorimetry (DSC), polarized light microscopy (PLM), atomic force microscopy (AFM), transmission electron microscopy (TEM), and electron diffraction (ED) techniques. The results show that the composition of the blends has great effect on the phase behavior and structure. Thin films of pure LC-PAEK and PEEK crystallized from the melts exhibit typical mosaic and spherulitic structures, respectively. For the blends with higher LC-PAEK contents (> 50%), the two components are miscible at the molecular level in the melting state, and a phase separation takes place during the cooling process, as a result of the competition between the phase separation and the LC-PAEK phase transition, resulting in an unusual ring-banded spherulite. The bright core and rings of the ring-banded spherulites under PLM are composed of the LC-PAEK phase, while the dark rings consist of a coexisting phase of PEEK with part of LC-PAEK. The formation of the ring-banded spherulites is attributable to structural discontinuity caused by a rhythmic radial growth. For the 50:50 LC-PAEK/PEEK blend, the ring-banded spherulites and individual PEEK spherulites coexist, which implies that a partial phase separation between the two components takes place in the melting state. In PEEK-rich blends, LC-PAEK is rejected into the boundary of PEEK spherulites. In addition, the effect of cooling rate and crystallization temperature on the phase behavior, especially the ring-banded spherulite formation in the blends, is discussed.

Properties of new thermotropic liquid crystalline poly(esterimide)s and their blends with a polyaryleneetherketone matrix #

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Rheological Properties of PET/PA66/Liquid Crystalline Copolyesteramide Blends

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Viscoelastic Effects on the Phase Separation in Thermoplastics Modified Cyanate Ester Resin

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Visualization of Poly(ether Imide) and Polycarbonate Blending in an Internal Mixer

Viscoelastic Effects on the Phase Separation in Thermoplastics-Modified Epoxy Resin

Preparation of High Density Polyethylene/polyethylene- Block -Poly(ethylene Glycol) Copolymer Blend Porous Membranes Via Thermally Induced Phase Separation Process and Their Properties

Thermal Behavior and Phase Behavior in Blends of Liquid Crystalline Poly(aryl Ether Ketone) and Poly(aryl Ether Ether Ketone) Containing Thioether Units

STRUCTURE AND PROPERTIES OF A NEW TYPE OF THERMOTROPIC LIQUID CRYSTALLINE POLY(ESTER IMIDE)S WITH NAPHTHALENE UNITS

Synthesis and Characterization of Thermotropic Liquid Crystalline Poly(ester Imide)s

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Rheology of Poly(lactic Acid)/poly(trimethylene Terephthalate) Blends Compatibilized by Clay or Maleic Anhydride-Grafted Poly(ethylene-Octene) Elastomer

Synthesis and Characterization of Thermoplastic Polyether-imide Elastormer

Rheological Properties in Blends of Poly(aryl Ether Ether Ketone) and Liquid Crystalline Poly(aryl Ether Ketone)

Synthesis and comparative study of thermoplastic polyetherimides derived from hydroquinone diphthalic anhydride isomers with tert -butyl group

Crystallization and melting behavior of poly(ether ketone ketone) (PEKK) copolymers synthesized by facile one-step method

Rheological Properties and Morphological Evolutions of Polypropylene/Ethylene-Butene Copolymer Blends

Phase Behavior and Rhythmically Grown Ring-Banded Spherulites in Blends of Liquid Crystalline Poly(Aryl Ether Ketone) and Poly(Aryl Ether Ether Ketone)

Blends of thermoplastic polyurethane and polyether–polyimide: preparation and properties