Abstract:The linear translation stages play an important role in computer numerical control machine tools, coordinate measuring machines and semiconductor lithograph equipment. Six geometric motion errors are associated with a precision linear stage. High precision simultaneous measurement of multiple degrees of freedom is essential for the multiple-dimension motion calibration of the ultra-precision linear translation stage. In this paper, a laser heterodyne interferometer for simultaneous measurement of displacement and roll angle based on the acousto-optic modulator is proposed. In this optical configuration, a stabilize single-frequency laser (f(0)) and two acousto-optic modulators are used to generate the laser source. The frequency shifts of the two AOMs are f(1) and f(2), respectively. The positive first order diffraction beams of two AOMs, f(0)+f(1) and f(0)+f(2), are merged into one orthogonally and linearly polarized beam with a frequency offset of (f(1)-f(2)) as the laser source for the roll measurement-unit. A half wave plate (HWP) is utilized as the roll sensing plate to magnify the tiny roll angle into an observable phase shift based on the change of polarization state. The resolution of the roll measurement system is determined by the amplification factor which can be enhanced by a multi-reflection cavity made of a specifically arranged assembly square pyramidal mirror and a folding mirror. The zeroth beam f(0) and the positive first order beam f(0)+f(1) provided by two AOMs forms two space separated beams for the displacement measurement, which can eliminate the periodic nonlinearity error. The optical system of the simultaneous measurement of displacement and roll angle were setup. The experimental results showed good repeatability and good consistency.

Co-axiality measuring system using dual-frequency laser

A Novel Method to Simultaneously Measure the Straightness

An Axial Displacement Measurement Relying on the Double-Helix Light Beam

Adaptive straightness measurement system with dual-frequency laser

Axial nanodisplacement measurement based on the double-helix point spread function generated using radially polarized beams with vortex phase modulation

High-precision laser alignment technique based on spiral phase plate

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Straightness/coaxiality measurement system with transverse Zeeman dual-frequency laser

Coaxiality measurement method based on revising aberration

Modified Homodyne Laser Interferometer Based on Phase Modulation for Simultaneously Measuring Displacement and Angle.

Research on coaxiality measurement system of large-span small-hole system based on laser collimation

Research on Measurement of On-Line Laster Coaxality Error for Rotary Parts

Study on Displacement Measurement with Optical Feedback of Dual Frequency Laser

Displacement Measurement with Λ/8 Resolution Based on the Bifurcate Subcavity Modulation Effect in a Dual Frequency Laser

High-precision laser beam lateral displacement measurement based on differential wavefront sensing

Optical Heterodyne Signal Acquisition System for Spatial Light with Broad Frequency Ranges

Feedback Displacement Measurement System Using Dual-Frequency He-Ne Laser

Research on Coaxiality Detection Technology Based on Laser Sensor

Laser Heterodyne Interferometer for Simultaneous Measurement of Displacement and Roll Angle Based on the Acousto-Optic Modulators

Experimental and theoretical study of displacement measurement based on frequency modulation optical feedback in a birefringence dual frequency laser

Nanometer-Resolution Displacement Measurement System Based on Weak Feedback Effect of Dual-Frequency Laser